List of top Textile Engineering Questions

The differential scanning calorimetry gives
A. crystallization temperature $(T_{c})$
B. glass transition temperature $(T_{g})$
C. dyeing temperature $(T_{dv})$
D. melting temperature $(T_{m})$ Choose the correct answer from the options given below:

Arrange the following weaves according to increasing number of heald frames required.
A. jacquard design
B. $3/1$ regular twill
C. honey comb weave
D. plain weave
E. 5-shaft satin Choose the correct answer from the options given below :

The sequence of machines for flow of cotton in ring spinning process is:
A. speed frame
B. blow Room
C. carding
D. draw frame
E. ring frame Choose the correct answer from the options given below :

During yarn formation on the ring frame, the cotton material passes through:
A. back roller
B. ring bobbin
C. delivery roller
D. traveller
E. lappet guide Choose the correct answer from the options given below :

The sequence of warp preparation for weaving is:
A. warping
B. sizing
C. winding
D. drawing and denting in
E. weaving Choose the correct answer from the options given below:

In the circular weft knitting, the knitting cycle of latch needle is:
A. loop formation and pulling
B. yarn feeding
C. latch opening
D. needle reaches to the clearing height
E. casting off Choose the correct answer from the options given below:

The major parts of the sizing machine are arranged in the sequence as:
A. drying cylinder
B. beaming unit
C. creel
D. splitting rods
E. size Box Choose the correct answer from the options given below:

Melt spinning involves the continuous process for the multi-filament yarn manufacturing follows the sequence as:
A. melting of chips
B. quenching
C. extrusion of melt
D. drying of chips
E. winding on the bobbin Choose the correct answer from the options given below :

The process flow of non-woven fabric manufacturing is:
A. web laying
B. fibre preparation
C. mechanical bonding
D. web formation
E. finishing Choose the correct answer from the options given below :

The sequence of processes involved in the chemical processing is :
A. scouring
B. finishing
C. dyeing
D. desizing
E. bleaching Choose the correct answer from the options given below:

In the draw texturising machine, the passage of yarn is:
A. primary heater
B. secondary heater
C. winding unit
D. creel
E. friction unit Choose the correct answer from the options given below:

Given below are two statements one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): Latch needles are self sufficient, no extra element is required for hook closure. Reason (R): When the needle moves up and down, the formed loop opens and closes the latch. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The uneven dyeing leads to the poor appearance in case of cotton fabric. Reason (R): The mature cotton fibres poses the problems in uniform dyeing. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): Polyester does not require desizing before dyeing. Reason (R): Polyester contains natural waxes and pectins. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): Polyester fabric possesses wash and wear characteristic. Reason (R): Polyester exhibits high crease recovery and poor moisture absorption. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The single thread tensile strength tester works on pendulum lever principle. Reason (R): The force acting on the specimen is directly proportional to the sine of the angle through which the pendulum is lifted from its vertical rest position. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The glass transition temperature of Nylon 6 decreases on absorption of moisture. Reason (R): Nylon 6 fibre shows partial dissolution on absorption of moisture. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The configuration and orientation of fibres in a yarn decides the uniformity of twisted yarn. Reason (R): The proper drafting in different stages of spinning changes the configuration and orientation of fibres. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): The yarn strength depends on the level of twist given in the final stage of ring spinning. Reason (R): Twist helps in binding the fibres through lateral pressure exerted by outer layers of fibres on the fibres in the core. In the light of the above statements, choose the most appropriate answer from the options given below:

Given below are two statements one is labelled as Assertion (A) and the other is labelled as Reason (R). Assertion (A): As spun polyester fibre gives almost zero value of birefringence. Reason (R): As spun polyester fibre is highly oriented. In the light of the above statements, choose the most appropriate answer from the options given below:

The HTHP (High Temperature High Pressure) dyeing of polyester is carried out at the temperature of __________ for effective dye penetration.

The acid dyes are mostly used for dyeing of

The bleaching of cotton fibres is carried out by __________ bleaching agent.

The surface of the fabric is made smooth and lustrous by using the singeing process, in which the __________ takes place.

The water repellency of fabric can be improved by application of the __________ finishes.