List of top Textile Engineering Questions

The no. of equations and variables in Peirce’s geometry
Dimethyl formamide (DMF) at boil is a solvent for
Nylon-4 is made by the polymerisation of
Willowing machine is required in the processing of
Decortication is related with
Tenacity of polynosic in g/den
The viscose solution should have a viscosity
During drawing crystallinity of a fibre
The terry towel is
The strength utilization of yarn in a woven fabric is
Mountaineering rope should have
The cross section of spinneret used for producing hollow fibre
Two cotton fibre varieties A and B having linear density of 3.2 and 4 (microgram/inch) respectively are tested on air flow instrument. The highest flow rate is obtained in case of
The correlation coefficient between packing density and porosity of a set of yarn is
Which one is correct regarding pilling resistance?
A shuttle loom is running at 240 picks per minute. The angular velocity of bottom shaft in radian per second is $n\pi$. The value of $n$ is
Which of the following shuttleless weaving system can offer maximum fabric width?
If $W$ and $S$ be the wales per inch and fraction shrinkage of a knitted fabric then the machine gauge $G$ will be
A ring frame is scheduled to run with the following settings:
Linear speed of traveller = 30 m/s
Front roller delivery speed = 18 m/min
Bobbin diameter = 25 mm
Spindle rpm = 15430
What ring diameter (in mm) will be appropriate for the above settings?
100 kg oven dry warp yarns were sized to the add-on of 8% and dried to overall moisture content of 10%. The final mass of the sized yarn will be
A 100-meter skein of polyester filament yarn weighs 2.5 grams, calculate its tex number.
In case of weft knitted fabric \(\underline{\hspace{2cm}}\) structure, each wale consists of alternate face and back loops.

A cotton fabric is treated with a finishing chemical of 6.0 % concentration. If the wet pick up is 80 %, the add-on of chemical on fabric is \(\underline{\hspace{2cm}}\)

In \(\underline{\hspace{2cm}}\) system, a warping beam with a complex pattern of colored stripes is obtained.

The process of removal of protruding fibers from the surface of fabric is called as \(\underline{\hspace{2cm}}\)