List of top Agricultural Engineering Questions asked in AP ECET Agricultural Engg

Bench terraces are used by dividing slope land into
The weir, which commonly used to measure minimum discharges in open channels
The ratio of the wheel or track in the direction of travel for a given distance under load and at no load condition is known as
The lubrication oil pressure in the hydraulic system of a tractor is developed by ___ pump
Perpendicular distance between point of share and lower portion of beam is known as
Thermodynamic cycle on which the petrol engine works is
Why the inflation pressure of rear wheels of tractor is less than the front wheels ?
If soil resistance is 0.6 $Kg/cm^{2}$ and width of plough is 120cm, depth 10cm then draft is
In_____planting both row to row and plant and plant distances are same.
Row to Row spacing maintained in riding type 6 or 8 row rice transplanter is
In seed drill, the area is covered by one revolution is 10 $m^{2}$, seed drop in one revolution is 40 grams, then what is the seed rate}
The angle between centre line of king-pin of tractor and vertical line is called
Alignment and registration exists in the following equipment
The shaft which raises and lowers the inlet and exhaust valves at proper time is
Depreciation per hour of Rs 8,00,000/- tractor working 1000 hours per year for 10 years is
The mechanical efficiency of an engine is expressed as
Which one of the following plough is used for two way ploughing
The process of removal of burnt or exhaust gas from the engine cylinder is known as
The component provided at the cutter end of the mower which causes the cut plants to fall towards the cut material is
The minimum thickness of the blade in chaff cutter is
Which of the following is air assisted sprayer
The commonly used hydraulic sprayers operating pressure is
The common firing order of a 4-stroke, 6 cylinder diesel engine is
The functions of tractor mounted ridger type sugarcane cutter planter are
The component designed to take side thrust from soil in MB plough is