Question:

The root mean square (RMS) value of an alternating voltage applied to a full-wave rectifier is \( \frac{V_0}{\sqrt{2}} \). Then the root mean square value of the rectified output voltage is:

(A) \( \dfrac{V_0}{\sqrt{2}} \)

(B) \( \dfrac{V_0^{2}}{\sqrt{2}} \)

(C) \( \dfrac{2V_0}{\sqrt{2}} \)

(D) \( \dfrac{V_0}{2\sqrt{2}} \)

Show Hint

Squaring removes the sign, so |V0 sin wt| and V0 sin wt have the same mean square and the same rms value.
Updated On: Nov 18, 2026
Show Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Understanding the Concept:
An ac voltage \(v = V_0\sin\omega t\) has peak value \(V_0\) and rms value \(V_0/\sqrt{2}\), as given. A full-wave rectifier turns each negative half cycle into a positive one, so the output is \(|V_0\sin\omega t|\).

Step 2: Key Formula or Approach:
The rms value is the square root of the mean of the square of the voltage: \(V_{\text{rms}} = \sqrt{\langle v^{2}\rangle}\).

Step 3: Detailed Explanation:
The output is \(|V_0\sin\omega t|\). Its square is \(V_0^{2}\sin^{2}\omega t\), exactly the same as the square of the input.
The mean of \(\sin^{2}\omega t\) over a cycle is \(1/2\), so \(\langle v^{2}\rangle = V_0^{2}/2\).
\[ V_{\text{rms}} = \sqrt{\frac{V_0^{2}}{2}} = \frac{V_0}{\sqrt{2}} \]
So the rms value is unchanged by full-wave rectification.

Step 4: Why the other options are wrong:
(B) \(V_0^{2}/\sqrt{2}\) has units of volt squared, so it cannot be a voltage.
(C) \(2V_0/\sqrt{2} = \sqrt{2}\,V_0\) is bigger than the peak value \(V_0\). An rms value can never exceed the peak value.
(D) \(V_0/(2\sqrt{2}) = 0.35V_0\) is smaller than the average of the rectified wave, \(2V_0/\pi = 0.64V_0\). An rms value is always at least as large as the average of the magnitude.

Final Answer:
The rms value of the rectified output is \(V_0/\sqrt{2}\), option (A). \[ \boxed{V_{\text{rms}} = \frac{V_0}{\sqrt{2}}} \]
Was this answer helpful?
1
2