For a CE-transistor amplifier, the audio signal voltage across the collected resistance of 2 kΩ is 2 V. Suppose the current amplification factor of the transistor is 100, find the input signal voltage and base current, if the base resistance is 1 kΩ.
For a CE-transistor amplifier, the audio signal voltage across the collected resistance of 2 kΩ is 2 V. Suppose the current amplification factor of the transistor is 100, find the input signal voltage and base current, if the base resistance is 1 kΩ.
Solution and Explanation
Collector resistance, RC = 2 kΩ = 2000 Ω
Audio signal voltage across the collector resistance, V = 2 V
Current amplification factor of the transistor, β = 100
Base resistance, RB = 1 kΩ = 1000 Ω
Input signal voltage = Vi
Base current = IB
We have the amplification relation as:
Voltage amplification =\(\frac{ V}{V_i} =β\frac{R_c}{R_b}\)
Vi = \(\frac{V}{β}\) \(\frac{R_B}{R_C}\)
Vi = \(\frac{2\times 1000}{100\times 2000}\)
Vi = 0.01 V
Therefore, the input signal voltage of the amplifier is 0.01 V.
Base resistance is given by the relation:
RB =\( \frac{V_i}{I_B}\)
RB = \(\frac{0.01}{1000}\)
RB = \(10\times10^{-6} A\)
RB = 10\( μA\)
Therefore, the base current of the amplifier is 10 \(µA\).
Top CBSE CLASS XII Physics Questions
- A boy of mass 50 kg is standing at one end of a, boat of length 9 m and mass 400 kg. He runs to the other, end. The distance through which the centre of mass of the boat boy system moves is
- A capillary tube of radius r is dipped inside a large vessel of water. The mass of water raised above water level is M. If the radius of capillary is doubled, the mass of water inside capillary will be
- A circular disc is rotating about its own axis. An external opposing torque 0.02 Nm is applied on the disc by which it comes rest in 5 seconds. The initial angular momentum of disc is
- A circular disc is rotating about its own axis at uniform angular velocity \(\omega.\) The disc is subjected to uniform angular retardation by which its angular velocity is decreased to \(\frac {\omega}{2}\) during 120 rotations. The number of rotations further made by it before coming to rest is
- A constant power is supplied to a rotating disc. The relationship between the angular velocity $\omega$ of the disc and number of rotations (n) made by the disc is governed by
Top CBSE CLASS XII Semiconductor electronics: materials, devices and simple circuits Questions
In an n-type silicon, which of the following statement is true:
Which of the statement is true for p-type semiconductors.
- In an n-type silicon, which of the following statement is true:
Carbon, silicon and germanium have four valence electrons each. These are characterised by valence and conduction bands separated by energy band gap respectively equal to \((E_g)_C, (E_g)_{Si}\) and \((E_g)_{Ge}\). Which of the following statements is true?
Two amplifiers are connected one after the other in series (cascaded). The first amplifier has a voltage gain of 10 and the second has a voltage gain of 20. If the input signal is 0.01 volt, calculate the output ac signal.
Top CBSE CLASS XII Questions
- 2, b, c are in A.P. and the range of determinant $\begin{vmatrix}1&1&1\\ 2&b&c\\ 4&b^{2}&c^{2}\end{vmatrix}$ is [2, 16]. Then find range of c is
- A boy of mass 50 kg is standing at one end of a, boat of length 9 m and mass 400 kg. He runs to the other, end. The distance through which the centre of mass of the boat boy system moves is
- A capillary tube of radius r is dipped inside a large vessel of water. The mass of water raised above water level is M. If the radius of capillary is doubled, the mass of water inside capillary will be
- A circular disc is rotating about its own axis. An external opposing torque 0.02 Nm is applied on the disc by which it comes rest in 5 seconds. The initial angular momentum of disc is
- A circular disc is rotating about its own axis at uniform angular velocity \(\omega.\) The disc is subjected to uniform angular retardation by which its angular velocity is decreased to \(\frac {\omega}{2}\) during 120 rotations. The number of rotations further made by it before coming to rest is
Concepts Used:
Transistors
Transistor
A transistor is a type of semiconductor device that can be used to both conduct and insulate electric current or voltage. A transistor basically acts as a switch and an amplifier. In simple words, we can say that a transistor is a miniature device that is used to control or regulate the flow of electronic signals.
Parts of a Transistor:
A transistor is a combination of three terminals made of semiconducting materials that help in making a connection to an external circuit and allow current to flow. The three terminals are:
- Base: The base activates the transistor. It is thin and lightly doped. It is put in the centre of the transistor.
- Emitter: The emitter is the negative terminal of the transistor. It is heavily doped and is moderately sized.
- Collector: The collector is the negative terminal of the transistor. It is located on the right side of a transistor and is moderately doped. It is larger than the emitter.
Read More: Difference Between NPN and PNP Transistor
Types of Transistors:
A transistor is a type of electronic device which is formed by p-type and n-type semiconductors.
NPN Transistor
- NPN transistor is a type of Bipolar Junction Transistor.
- In this, electrons are major current carriers, and minor ones are holes.
- Their arrangement is in such a way that N-type doped semiconductors are separated by the layer of P-type doped semiconductors which is a thin layer of material embedded between them.
- Emitter Current = Collector Current + Base Current
PNP Transistor
- PNP transistor is also a type of Bipolar Junction Transistor.
- In these, holes are the major source that carries current, and electrons are minor.
- Their arrangement is in a way that P-type doped semiconductor is separated by N-type doped semiconductor material which is a thin layer.
- Emitter Current = Collector Current + Base Current
Read More: Characteristics of a Transistor
Configurations of a Transistor:
Using the three types of configuration can be used to design any transistor circuit. The three types of configuration of a transistor are:
- Common Emitter Transistor
- Common Base Transistor
- Common Collector Transistor
Common Emitter (CE) Configuration of a Transistor
In Common Emitter Configuration, the transistor’s emitter terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Base-Emitter voltage (VBE) when Collector-Emitter voltage (VCE) is held constant.
- Rin = ΔVBE/ΔIB | VCE = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
- Rout = ΔVCE/ΔIC | IB = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the base current (IB) when the collector-emitter voltage (VCE) is constant.
- α = ΔIC/ΔIB | VCB = Constant
Common Base (CB) Configuration of a Transistor
In Common Base Configuration, the transistor’s base terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IE) with Base-Emitter voltage (VBE) when the Collector Base voltage (VCB) is held constant.
- Rin = ΔVBE/ΔIE | VCB = Constant
Output Characteristics
- Variation of collector current (IC) with Collector-Base voltage (VCB) when the emitter current (IE) is held constant.
- Rout = ΔVCB/ΔIB | IE = Constant
Current Transfer Characteristics
- The variation of the collector current (IC) with the emitter current (IE) when the Collector Base voltage (VCB) is constant.
- α = ΔIC/ΔIE | VCB = Constant
Common Collector Configuration of a Transistor
In Common Collector Configuration, the transistor’s collector terminal will be connected common between the output terminal and the input terminal.
Input Characteristics
- Variation of emitter current (IB) with Collector-Base voltage (VCB) when the Collector Base voltage (VCB) is held constant.
Output Characteristics
- Variation of emitter current (IE) with Collector-Emitter voltage (VCE) when the base current (IB) is held constant.
Current Transfer Characteristics
- The variation of the collector current (IE) with the base current (IB) when the Collector-Emitter voltage (VCE) is constant.