List of top Electrical Engineering Questions asked in AP PGECET

A system is "Controllable" if:

In State-Space representation, the "State Vector" consists of:

Lead compensation is used primarily to:

A Gain Margin of 0 dB or a Phase Margin of 0 degrees indicates the system is:

Boost converter output \( V_o \) is:

The Root Locus always starts at the _______ and ends at the _______.

In the Routh-Hurwitz criterion, a system is stable if:

For a Type-1 system, the steady-state error to a unit ramp input is:

The bridge used for the measurement of an unknown capacitance is:

The Lissajous patterns are used to measure:

Which of the following is an "Active" transducer?

A Q-meter works on the principle of:

A Dynamometer-type instrument is primarily used as a "Transfer Instrument" because:

A digital voltmeter (DVM) with a \( 3 \frac{1}{2} \) digit display can show a maximum count of:

The "Creeping" phenomenon occurs in which type of instrument?

A 100V voltmeter has an accuracy of \( \pm \)2% of full-scale deflection (FSD). If it reads 50V, what is the limiting error?

Which bridge is best suited for the measurement of a high-quality factor (Q) inductor?

A Permanent Magnet Moving Coil (PMMC) instrument can be used to measure:

To minimize loading, the voltmeter should have:

In a Voltmeter the sensitivity is given by:

In measuring instruments, The Damping torque is used to:

In an analogue instrument, the Controlling torque is provided by:

A Moving iron instrument measures:

In a moving coil instruments, the deflecting torque is proportional to:

Mealy output depends on: