>
TS PGECET
List of top Questions asked in TS PGECET
A reaction in which one of the products of the reaction acts as a catalyst is called:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Reaction
The unit of frequency factor in Arrhenius equation is:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Kinetics
For Arrhenius model of the rate constant \( k = k_0 \cdot e^{-E/RT} \), the graph drawn between \( \ln(k) \) versus \( \frac{1}{T} \) gives the slope of:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Kinetics
For a highly exothermic, solid-catalysed reaction, what reactor configuration should be used to achieve high conversion?
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Reaction
The catalyst in a second order reversible reaction increases the rate of the:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Reaction
The molecular diffusivity of a liquid:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
A space time of 3 hours for a flow reactor means that:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Reaction
For all positive reaction orders and for a given reactor duty:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Reaction
Which one of the following fixes the volume of batch reactor for a particular conversion and production rate?
TS PGECET - 2026
TS PGECET
Chemical Engineering
Chemical Reaction
The reason for referring packed towers over plate towers in distillation practice is that the packed tower operation gives:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
In binary distillation, the number of bubble cap per tray primarily depends on:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
In distillation column design, the McCabe-Thiele procedure is inadequate and Ponchon-Savarit procedure is needed when:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
In an inter-phase mass transfer process, the lesser the solubility of a given solute in a liquid, the higher are the chances that the transfer process will be:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
In an absorber the equilibrium curve is always:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
The individual mass transfer coefficients (\(\text{mol}/\text{m}^2\cdot\text{s}\)) for absorption of a solute from a gas mixture into a liquid solvent are \( k_L = 4.5 \) and \( k_G = 1.5 \). The slope of the equilibrium line is 3. Which one of the following resistance(s) is/are controlling?
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
A batch of material is dried under constant drying conditions. When drying is taking place from all the surfaces, the rate of drying during the constant rate period is:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
Which one of the following tray gives greatest flexibility in distillation column?
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
The dew point of an unsaturated mixture of water vapour and air at constant temperature and pressure:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
An azeotropic mixture of two liquids has boiling point higher than either of them when it:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
If there is condensation of carrier steam in the steam distillation of high-boiling organic materials, then:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
Prandtl number in heat transfer is analogous to the following dimensionless number in mass transfer:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
Unsaturated air (with dry bulb temperature and dew point being \( 35^\circ\text{C} \) and \( 18^\circ\text{C} \) respectively) is passed through a water spray chamber maintained at \( 15^\circ\text{C} \). The air will be:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
Which one of the following forms minimum boiling azeotrope at one atmosphere?
TS PGECET - 2026
TS PGECET
Chemical Engineering
Mass Transfer
For laminar film condensation on vertical surface, the film thickness:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Heat Transfer
If the baffle spacing in a shell and tube heat exchanger increases, then the Reynolds number of the shell side fluid:
TS PGECET - 2026
TS PGECET
Chemical Engineering
Heat Transfer
Prev
1
...
87
88
89
90
91
...
243
Next