Step 1: Understanding the Concept:
An a.c. generator turns mechanical energy into electrical energy. It works on electromagnetic induction. When the flux through a coil changes, an emf is induced in it.
Step 2: Principle:
When a coil rotates in a uniform magnetic field, the flux linked with it changes all the time. By Faraday's law, an emf \( \varepsilon = -\dfrac{d\phi}{dt} \) is induced.
Step 3: Construction (labelled diagram described in words):
Draw a rectangular armature coil ABCD of \( N \) turns between the poles N and S of a strong permanent magnet. The magnetic field points from N to S.
The coil is mounted on a shaft that can be turned by a turbine or a handle. Label the shaft, the coil, the two slip rings \( R_1 \) and \( R_2 \) fixed on the shaft, and the two carbon brushes \( B_1 \) and \( B_2 \).
The ends of the coil are joined to the two slip rings. The brushes press on the rings and connect the coil to the external load resistance \( R \).
Step 4: Working:
As the shaft turns, the coil rotates in the field. The flux through the coil changes, so an emf is induced. The slip rings and brushes carry the current to the outside circuit.
In the first half turn, the current flows in one direction through the load. In the next half turn, it reverses. So the current is alternating.
Step 5: Expression for the induced emf:
Let the area of the coil be \( A \), and the field \( B \). At \( t = 0 \), the normal to the coil is along \( \vec{B} \). After a time \( t \), the coil has turned by an angle \( \theta = \omega t \).
The flux linked with \( N \) turns is:
\[ \phi = NBA\cos\omega t \]
By Faraday's law:
\[ \varepsilon = -\dfrac{d\phi}{dt} = NBA\omega\sin\omega t \]
Writing \( \varepsilon_0 = NBA\omega \), we get \( \varepsilon = \varepsilon_0 \sin\omega t \), with \( \omega = 2\pi/T \).
Step 6: When is the emf maximum?
The emf is maximum when \( \sin\omega t = \pm 1 \). That is \( \omega t = \pi/2 \) or \( 3\pi/2 \).
Using \( \omega = 2\pi/T \):
\[ \dfrac{2\pi}{T}\,t = \dfrac{\pi}{2} \Rightarrow t = \dfrac{T}{4}, \qquad \dfrac{2\pi}{T}\,t = \dfrac{3\pi}{2} \Rightarrow t = \dfrac{3T}{4} \]
At these instants, the plane of the coil is parallel to the field, so the rate of cutting of flux is the greatest.
Final Answer:
The induced emf is \( \varepsilon = NBA\omega\sin\omega t \). In one cycle, the emf is maximum at \( t = T/4 \) and \( t = 3T/4 \).
\[ \boxed{\varepsilon = NBA\omega\sin\omega t;\quad t = \dfrac{T}{4},\ \dfrac{3T}{4}} \]