>
Textile Engineering and Fibre Science
List of top Textile Engineering and Fibre Science Questions
In Indiquip sizing machine, it is necessary to
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
Friction Spun yarns are characterized by
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Different texturing methods
In which of the following, number of teeth decides the Noil % in Comber
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
In Spinning Triangle the height is ZERO, it indicates
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
Consider the following and choose the correct answer with respect to Twisting of yarn. Assertion [A]: Ring rail moves fast in one direction and slow in other direction. Reason [R]: Yarn Balance is obtained by winding and binding coils
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
Use of Air Nozzle in Ring Frame results in
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
Increase in Initial Nozzle pressure from $1.5~kg/cm^{2}$ to $2.5~kg/cm^{2}$ in Air Jet Spinning results in formation of which one of the following fibres?
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Different texturing methods
In Modern Comber, use of half moon shaped Web it is possible to achieve Combed Sliver with
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
In Comber preparatory, as the Pre-Comb draft increases, the Noil % will
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
In Roving frame, the Sliver Breakage stop motion is based on one of the following principles
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
Long Trunk is observed in
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
It is a quality control study (Routine), in which the examination is in three areas across the width of output in Carding
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Fundamentals of carding
In Carding, Point to Point action occurs between
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Fundamentals of carding
The production of Trilobal fibre in Man-made fibre is derived from the feature of
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Textile Fibres and its Classification
Tinting is done in one of the following cases
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Textile Fibres and its Classification
A Control fabric has Numeri 6, after mercerization the expected value is
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Fabric Performance Properties
The constant used for conversion from Denier to Cotton system is
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Count systems
The drive for the feed lattice in Mixing Bale Opener is
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Working principles of modern blow room machines
In fibre length analysis, Dispersion or Scatter is useful to determine
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Textile Testing
In a Blowroom, a study was made to compare the fibre fracture using 2 Bladed and Kirschner beater. When the same mixing was processed using two Blowroom lines, the best statistical measure to choose is
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Working principles of modern blow room machines
Mercerisation of Cotton fabrics will result in
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Fabric Performance Properties
Spinning speeds in Man-made fibre of \(10,000\ \text{mpm}\) results in the formation of which Yarn?
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Yarn Engineering
Consider Shirting fabrics made from Varalakshmi Cotton and 14 tex Polyester Texturised yarns, then the bending rigidity of Polyester fabric when compared to Cotton is
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Fabric Performance Properties
Match the following:
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Textile Testing
Compared to Cotton, the special feature of Wool is
TS PGECET - 2026
TS PGECET
Textile Engineering and Fibre Science
Textile Fibres and its Classification
Prev
1
2
3
4
5
6
...
31
Next