Step 1: Read the circuit:
The ammeter is in series with the rest of the circuit. The voltmeter is connected across the 24 \( \Omega \) resistor, so it is in parallel with it.
The ammeter is ideal, so its resistance is zero. The voltmeter is ideal, so its resistance is infinite and it draws no current.
So the whole current \( I \) shown by the ammeter flows through the 24 \( \Omega \) resistor.
Step 2: Condition on the readings:
The voltmeter reads the potential difference across the resistor, so \( V = I \times 24 \), that is, \( \dfrac{V}{I} = 24\ \Omega \).
The internal resistance of 3 \( \Omega \) of the source does not matter here. A suitable emf can be chosen to give any current, so only the ratio \( V/I \) counts.
Step 3: Test each option:
(A) \( \dfrac{12}{2} = 6\ \Omega \). Not 24 \( \Omega \), so it is wrong.
(B) \( \dfrac{2}{0.5} = 4\ \Omega \). Wrong.
(C) \( \dfrac{6}{2} = 3\ \Omega \). This is the internal resistance, not the 24 \( \Omega \) resistor, so it is wrong.
(D) \( \dfrac{12}{0.5} = 24\ \Omega \). Correct.
Step 4: Check feasibility:
For (D) the source must have emf \( E = 12 + 0.5 \times 3 = 13.5 \) V. This is a suitable source, so the pair is possible.
Final Answer:
12 V, 0.5 A, option (D).