List of top Questions asked in CUET (PG)

Match List - I with List - II.

Choose the correct answer from the options given below :
What is the ordinate of influence line at Q for reaction at S as shown in figure given below ? (Beam P-Q-R-S with internal hinge at Q, supports at P, R, and S. Distances: PQ=3m, QR=3m, RS=6m)
(Aromatic compound with an isobutyl side chain) $\xrightarrow[KOH, Heat]{KMnO_4}$ ?
Match List - I with List - II.

Choose the correct answer from the options given below :
Match List - I with List - II.
Choose the correct answer from the options given below :
The extra widening required for a National highway curve in a plain terrain with a radius of 220 m and 7 m wheel base is:
Match List - I with List - II.

Choose the correct answer from the options given below :
The braking distance for a vehicle moving on a positive 3% grade at an initial speed of 50 Km/hr and final speed of 20 Km/hr would be :
The velocity distribution of a viscous liquid ($\mu = 0.9 \text{ N-s/m}^2$) over a fixed boundary is given by $u = 0.68y - y^2$, in which $u$ is the velocity in m/s at a distance $y$ meters above the boundary surface. Determine the shear stress at the surface.
The natural rain is specifically termed as an acid rain when its pH value is :
Temporary hardness of water is mainly due to the presence of :
Find the delta ($\Delta$) for a crop if the duty for a base period of 110 days is 1400 hectares/cumec.
The load carrying capacity of a column designed by working stress method is 1000 kN. The ultimate collapse load of the column is:
A hydraulic jump occurs where there is a break in grade from a:
What is the stiffness matrix for the beam shown in the figure (fixed at one end, guided roller at the other)?
A simply supported prestressed concrete beam of span 30 m. The initial stress is 1000 MPa. The slip in the jack during tensioning has been 3 mm. If $E_s = 200$ GPa, the loss of prestress due to anchorage is:
The axial force in the member PQ of the plane truss shown in figure is:
(Aromatic compound with an isobutyl side chain) $\xrightarrow[KOH, Heat]{KMnO_4}$ ?
In a single degree of freedom undamped spring-mass system, an additional damper is added in parallel such that the system remains underdamped. Which one of the following statements is always true?
The point on an extended massive object attached to a pivot where a perpendicular impact will produce no reactive shock at the pivot is known as:
Shake 2000 software is mainly used for:
The Centre to Centre maximum distance between rivets in tension member of thickness 12 mm is:
In PERT technique, the time estimate of activities and probability of their occurrence follows:
Horizontal stiffener in a plate girder is provided to safeguard against:
The three phases involved in the management of large projects are:
The minimum strain at failure in tension steel having yield stress $f_y = 415 \text{ MPa}$ and Young's Modulus $E_s = 200 \text{ GPa}$ as per Limit State Method of design is:
Design strength for M25 concrete in direct compression, bending compression and flexural tension are, respectively: