Step 1: Understanding the Concept:
The high pressure (H.P.) cutout is a safety switch. It stops the compressor if the discharge pressure becomes too high.
Step 2: Key Approach:
We look for the condenser type where the discharge pressure can rise suddenly because the cooling medium fails.
Step 3: Detailed Explanation:
In a water cooled condenser, the cooling water comes by a pump or a supply line.
If the water supply stops or the pump fails, the condenser cannot remove the heat.
The pressure of the refrigerant then rises fast and may burst a part.
The H.P. cutout senses this rise and switches off the compressor in time. So it is essential with water cooled condensers.
Step 4: Why the other options are wrong.
Air cooled condensers, natural or forced, depend on air, which is always available. The pressure rises only slowly, for example if the fan fails or the coil is dirty.
So the H.P. cutout is not considered essential there.
Final Answer:
The H.P. cutout is essential with a water cooled condenser. This is option (A).