Question:

Five resistors are joined as shown in the figure. Between the points A and B, a battery of 6 V is connected. How much current is flowing in arm FC?



Show Hint

The bridge is balanced (2/1 = 4/2), so no current flows in CD. Then FC and CE form a 6 ohm branch across 6 V.
Updated On: Oct 21, 2026
  • 2.0 A
  • 1.5 A
  • 1.0 A
  • 0.5 A
Show Solution
collegedunia
Verified By Collegedunia

The Correct Option is C

Solution and Explanation

Step 1: Understanding the Circuit:
From the figure, terminal A is joined to F by a plain wire and terminal B is joined to E. So the 6 V battery is effectively across F and E.
The resistors are: FC = 2 \(\Omega\), FD = 1 \(\Omega\), CD = 2 \(\Omega\), CE = 4 \(\Omega\), DE = 2 \(\Omega\).
This is a Wheatstone bridge with CD as the bridge arm.

Step 2: Check the balance condition:
The bridge is balanced when \(\dfrac{R_{FC}}{R_{FD}} = \dfrac{R_{CE}}{R_{DE}}\).
\[ \frac{2}{1} = 2 \quad \text{and} \quad \frac{4}{2} = 2 \]
Both ratios are equal, so the bridge is balanced. Points C and D are at the same potential.
So no current flows in the 2 \(\Omega\) resistor CD, and we can ignore it.

Step 3: Find the current in arm FC:
Now there are two parallel branches between F and E.
Branch F-C-E has \(2 + 4 = 6\ \Omega\). Branch F-D-E has \(1 + 2 = 3\ \Omega\).
Each branch has the full 6 V across it.
\[ I_{FC} = \frac{6}{6} = 1.0 \text{ A} \]

Step 4: Check against the other branch:
\[ I_{FD} = \frac{6}{3} = 2.0 \text{ A} \]
So 2.0 A flows in arm FD, not in FC. This is the value in option (A), which is a trap.
Options (B) 1.5 A and (D) 0.5 A do not match any branch current.

Final Answer:
The current in arm FC is 1.0 A, which is option (C). \[ \boxed{I_{FC} = 1.0 \text{ A}} \]
Was this answer helpful?
0
0

Top CBSE CLASS XII Current electricity Questions

View More Questions