Question:
Cover and plinth (CAP) is related to
Cover and plinth (CAP) is related to
Show Hint
CAP is a temporary open-air grain storage system widely utilized by organizations like the Food Corporation of India (FCI) during surplus harvest periods.
Updated On: Jul 7, 2026
- Condensation
- Storage
- Drying
- Blanching
Show Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Step 1: Understanding the Concept:
Cover and Plinth (CAP) is a scientific, low-cost outdoor storage method designed for temporary preservation of massive food grain bags.
Step 3: Detailed Explanation:
In CAP storage:
1.
Plinth: A raised platform (usually made of concrete or brick) is constructed about 30 to 45 cm above ground level to prevent moisture entry from the soil.
2. Grain bags are stacked systematically on this plinth.
3.
Cover: The stack of grain bags is covered with a waterproof, UV-stabilized black polyethylene cover and secured with ropes to protect the bags from rain, wind, and pests.
Thus, CAP is exclusively a storage technique.
Step 4: Final Answer:
The correct option is 2, which corresponds to Storage.
Cover and Plinth (CAP) is a scientific, low-cost outdoor storage method designed for temporary preservation of massive food grain bags.
Step 3: Detailed Explanation:
In CAP storage:
1.
Plinth: A raised platform (usually made of concrete or brick) is constructed about 30 to 45 cm above ground level to prevent moisture entry from the soil.
2. Grain bags are stacked systematically on this plinth.
3.
Cover: The stack of grain bags is covered with a waterproof, UV-stabilized black polyethylene cover and secured with ropes to protect the bags from rain, wind, and pests.
Thus, CAP is exclusively a storage technique.
Step 4: Final Answer:
The correct option is 2, which corresponds to Storage.
Was this answer helpful?
0
0
Top ICAR AIEEA Agricultural Engineering and Technology Questions
- Which of the following farm equipment is not going to be utilized during the wheat production?
- On the farm, during paddy land preparation, if one wheel of tractor gets in mud, which of the following mechanism will be useful to take out the tractor from mud by distributing equal amount of traction at both the rear wheels?
- 20 labors engaged in a farm-operation on paddy farm for 6h. In an ideal conditions, how much maximum energy is utilized by labors into the farm?
(A) 8.94 kWh (B) 120 kWh (C) 12 hPh (D) 240 hPh Choose the correct answer from the options given below: - Which of the following farm operations utilizes the stationary source of power?
(A) Irrigation Water Lifting (B) Winnowing (C) Threshing (D) Harvesting (E) Cultivation (F) Transportation Choose the correct answer from the options given below: - Which of the following methods are employed for the estimation of infiltration characteristics of soil for design of irrigation system?
(A) Use of Infiltrometer (B) Measurement of subsidence of free water in a large basin (C) Estimation of accumulated infiltration from water front advance data Choose the correct answer from the options given below:
View More Questions
Top ICAR AIEEA Storage Structures Questions
- When a mass of grain having angle of internal friction of \(30^\circ\) is stored in a bin, what will be the Rankine's earth pressure coefficient?
- If a body is in equilibrium, we may conclude that
(A) No force is acting on the body.
(B) The resultant of all the horizontal forces acting on it is zero.
(C) The resultant of all the vertical forces acting on it is zero.
(D) The moments of the forces about any point is zero.
Choose the correct answer from the options given below. - The centre of gravity of a right circular cone of diameter (d) and height (h) lies at a distance of ____________ from the base measured along the vertical radius.
- If the moment of inertia of a body along a perpendicular axis passing through its centre of gravity is 50 kg.m2 and the mass of the body is 30 kg. What will be the moment of inertia (kg.m2) of the same body along another axis, which is 50 cm away from the current axis and parallel to it?
- The moment of inertia of a triangular section of base (b) and height (h) about an axis passing through its vertex and parallel to the base is ____________ times as that passing through its centre of gravity and parallel to the base.
View More Questions
Top ICAR AIEEA Questions
- Which of the following statements is false?
- Which of the following is an example of an inventory?
- According to Adam Smith, productivity gains could be brought about through .
- The supply curve for an artificially scarce good is .
- Which of the following would not be considered an opportunity cost of paid employment?
View More Questions