(a) Though the image size is bigger than the object, the angular size of the image is equal to the angular size of the object. A magnifying glass helps one see the objects placed closer than the least distance of distinct vision (i.e., 25cm). A closer object causes a larger angular size . A magnifying glass provides angular magnification. Without magnification, the object cannot be placed closer to the eye. With magnification, the object can be placed much closer to the eye.
(b) Yes, the angular magnification changes. When the distance between the eye and a magnifying glass is increased, the angular magnification decreases a little. This is because the angle subtended at the eye is slightly less than the angle subtended at the lens. Image distance does not have any effect on angular magnification.
(c) The focal length of a convex lens cannot be decreased by a greater amount. This is because making lenses having very small focal lengths is not easy. Spherical and chromatic aberrations are produced by a convex lens having a very small focal length.
(d) The angular magnification produced by the eyepiece of a compound microscope is [(\(\frac{25 }{ ƒe}\)) + 1] Where,
fe = Focal length of the eyepiece
It can be inferred that if fe is small, then angular magnification of the eyepiece will be large. The angular magnification of the objective lens of a compound microscope is given as \(\frac{1 }{ (| u°| ƒ°)}\) Where,
u° = Object distance for the objective lens.
ļ = Focal length of the objective
The magnification is large when \(u° > ƒ°\). In the case of a microscope, the object is kept close to the objective lens. Hence, the object distance is very little. Since u° is small, ƒ° will be even smaller. Therefore, ƒe and ƒº are both small in the given condition.
(e) When we place our eyes too close to the eyepiece of a compound microscope, we are unable to collect much refracted light. As a result, the field of view decreases substantially. Hence, the clarity of the image gets blurred. The best position of the eye for viewing through a compound microscope is at the eye - ring attached to the eyepiece. The precise location of the eye depends on the separation between the objective lens and the eyepiece.
A small candle,2.5cm in size is placed at 27cm in front of a concave mirror of radius of curvature 36cm.At what distance from the mirror should a screen be placed in order to obtain a sharp image? Describe the nature and size of the image.If the is moved closer to the mirror, how would the screen have to be moved?
A 4.5cm needle is placed 12cm away from a convex mirror of focal length 15cm. Give the location of the image and the magnification.Describe what happens as the needle is moved farther from the mirror.
A tank is filled with water to a height of 12.5cm. The apparent depth of a needle lying at the bottom of the tank is measured by a microscope to be 9.4cm. What is the refractive index of water? If water is replaced by a liquid of refractive index 1.63 up to the same height, by what distance would the microscope have to be moved to focus on the needle again?

(a)and(b)show the refraction of a ray in air incident at 60° with the normal to a glass-air and water-air interface, respectively. Predict the angle of refraction in glass when the angle of incidence in water is 45° with the normal to a water-glass interface
A small bulb is placed at the bottom of a tank containing water to a depth of 80cm. What is the area of the surface of water through which light from the bulb can emerge? The refractive index of water is 1.33. (Consider the bulb to be a point source.)

Lenses that are made by combining two spherical transparent surfaces are called spherical lenses. In general, there are two kinds of spherical lenses. Lenses that are made by joining two spherical surfaces that bulge outward are convex lenses, whereas lenses that are made by joining two spherical surfaces that curve inward are concave lenses.