Question:

(a) Why is manganin used in wire-wound standard resistors? Calculate the temperature at which the resistance of a wire increases by $25\%$ of its resistance at room temperature $27{\cdot}5\,^{\circ}\text{C}$. The temperature coefficient of resistance of the material of the wire is $0{\cdot}004\,^{\circ}\text{C}^{-1}$.

(b) How does the resistivity of a semiconductor depend on temperature? Show it on a plot.

Show Hint

Manganin has a very small temperature coefficient. Use R_T = R_0 [1 + alpha (T - T_0)] with R_T = 1.25 R_0.
Updated On: Oct 21, 2026
Show Solution
collegedunia
Verified By Collegedunia

Solution and Explanation

Step 1: Why manganin is used in standard resistors (part a):
Manganin is an alloy of copper, manganese and nickel. It has two useful properties.
1. Its resistivity is high, so a short wire gives a large resistance.
2. Its temperature coefficient of resistance is very small, so its resistance stays almost the same when the temperature changes.
A standard resistor must keep a fixed value, so manganin is a good choice.

Step 2: Formula for the temperature (part a):
The resistance at temperature T is:
\[ R_T = R_0\,[1 + \alpha\,(T - T_0)] \]
Here \(T_0 = 27.5^{\circ}\text{C}\) and \(\alpha = 0.004\ ^{\circ}\text{C}^{-1}\). The resistance rises by 25 percent, so \(R_T = 1.25\,R_0\).

Step 3: Solve for T:
\[ 1.25 = 1 + 0.004\,(T - 27.5) \]
\[ 0.25 = 0.004\,(T - 27.5) \quad \Rightarrow \quad T - 27.5 = 62.5 \]
\[ T = 27.5 + 62.5 = 90^{\circ}\text{C} \]

Step 4: Resistivity of a semiconductor (part b):
In a semiconductor, a rise in temperature frees more electrons and holes from the bonds. The number of carriers increases very fast, and this effect is larger than the extra collisions. So the resistivity decreases as the temperature rises. The temperature coefficient of resistivity is negative.

Step 5: The plot:
Draw resistivity \(\rho\) on the vertical axis and temperature T on the horizontal axis. The graph is a smooth curve that falls steeply at low temperature and flattens at higher temperature. It is of the form \(\rho \propto e^{E_g/2kT}\). It never touches the axis.

Final Answer:
Manganin has high resistivity and a very small temperature coefficient. The wire reaches 25 percent more resistance at 90 degrees C. The resistivity of a semiconductor falls with a rise of temperature. \[ \boxed{T = 90^{\circ}\text{C}} \]
Was this answer helpful?
0
0