List of top Physics Questions

Two batteries of emf 3V 6V and internal resistances 0.2Ω 0.4Ω are connected in parallel. This combination is connected to a 4Ω resistor. Find:
(i) the equivalent emf of the combination
(ii) the equivalent internal resistance of the combination
(iii) the current drawn from the combination

A p-type Si semiconductor is made by doping an average of one dopant atom per \( 5 \times 10^7 \) silicon atoms. If the number density of silicon atoms in the specimen is \( 5 \times 10^{28} \, \text{atoms m}^{-3} \), find the number of holes created per cubic centimeter in the specimen due to doping. Also give one example of such dopants.

A transparent solid cylindrical rod (refractive index \( \frac{2}{\sqrt{3}} \)) is kept in air. A ray of light incident on its face travels along the surface of the rod, as shown in the figure. Calculate the angle \( \theta \).

In a Young's double-slit experiment, two light waves, each of intensity \( I_0 \), interfere at a point, having a path difference \( \frac{\lambda}{8} \) on the screen. Find the intensity at this point.

In a diffraction experiment, the slit is illuminated by light of wavelength 600 nm. The first minimum of the pattern falls at \( \theta = 30^\circ \). Calculate the width of the slit.

Assertion (A): The potential energy of an electron revolving in any stationary orbit in a hydrogen atom is positive.
Reason (R): The total energy of a charged particle is always positive.

Assertion (A): We cannot form a p-n junction diode by taking a slab of a p-type semiconductor and physically joining it to another slab of an n-type semiconductor.

Reason (R): In a p-type semiconductor, \( n_e \gg n_h \) while in an n-type semiconductor \( n_h \gg n_e \).

Assertion (A): It is difficult to move a magnet into a coil of large number of turns when the circuit of the coil is closed.

Reason (R): The direction of induced current in a coil with its circuit closed, due to motion of a magnet, is such that it opposes the cause.

When a p-n junction diode is forward biased, the:

Which of the following figures correctly represent the shape of the curve of binding energy per nucleon as a function of mass number?

Let \( \lambda_e, \lambda_p, \lambda_d \) be the wavelengths associated with an electron, a proton, and a deuteron, all moving with the same speed. Then the correct relation between them is:

The stopping potential \( V_0 \) measured in a photoelectric experiment for a metal surface is plotted against frequency \( \nu \) of the incident radiation. Let \( m \) be the slope of the straight line so obtained. Then the value of the charge of an electron is given by \( h \) (where \( h \) is the Planck’s constant):

A beaker is filled with water (refractive index \( \frac{4}{3} \)) up to a height \( H \). A coin is placed at its bottom. The depth of the coin, when viewed along the near normal direction, will be:

A voltage \( v = v_0 \sin(\omega t) \) applied to a circuit drives a current \( i = i_0 \sin(\omega t + \varphi) \) in the circuit. The average power consumed in the circuit over a cycle is:

You are required to design an air-filled solenoid of inductance \( 0.016 \, \text{H} \) having a length \( 0.81 \, \text{m} \) and radius \( 0.02 \, \text{m} \). The number of turns in the solenoid should be:

A 1 cm segment of a wire lying along the x-axis carries a current of 0.5 A along the \( +x \)-direction. A magnetic field \( \vec{B} = (0.4 \, \text{mT} \hat{j}) + (0.6 \, \text{mT} \hat{k}) \) is switched on. The force acting on the segment is:

Two identical point masses P and Q, suspended from two separate massless springs of spring constants \(k_1\) and \(k_2\), respectively, oscillate vertically. If their maximum velocities are the same, the ratio of the amplitude of P to the amplitude of Q is :

A particle of mass \(m\) is moving around the origin with a constant speed \(v\) along a circular path of radius \(R\). When the particle is at \( (0, R) \), its velocity is \( \mathbf{v} = -v \hat{\mathbf{i}} \). The angular momentum of the particle with respect to the origin is :

A balloon is made of a material of surface tension S and has a small outlet. It is filled with air of density \( \rho \). Initially the balloon is a sphere of radius R. When the gas is allowed to flow out slowly at a constant rate, its radius shrinks as \( r(t) \). Assume that the pressure inside the balloon is \( P(r) \) and is more than the outside pressure (\( P_0 \)) by an amount proportional to the surface tension and inversely proportional to the radius. The balloon bursts when its radius reaches \( r_0 \). Then the speed of gas coming out of the balloon at \( r = R \) is :

The radius of Martian orbit around the Sun is about 1.5 times the radius of the orbit of Mercury. The Martian year is 687 Earth days. Then which of the following is the length of 1 year on Mercury?

An AC power supply of 220 V at 50 Hz, a resistor of 20\( \Omega \), a capacitor of reactance 25\( \Omega \) and an inductor of reactance 45\( \Omega \) are connected in series. The corresponding current in the circuit and the phase angle between the current and the voltage is, respectively :

A container has two chambers of volumes \(V_1 = 2\) litres and \(V_2 = 3\) litres separated by a partition made of a thermal insulator. The chambers contain \(n_1 = 2\) moles and \(n_2 = 3\) moles of ideal gas at pressures \(p_1 = 1\) atm and \(p_2 = 2\) atm, respectively. When the partition is removed, the mixture attains an equilibrium pressure of :

A bob of heavy mass \(m\) is suspended by a light string of length \(l\). The bob is given a horizontal velocity \(v_0\) as shown in figure. If the string gets slack at some point P making an angle \( \theta \) from the horizontal, the ratio of the speed \(v\) of the bob at point P to its initial speed \(v_0\) is :

There are two inclined surfaces of equal length inclined at an angle of \(45^\circ\) with the horizontal. One of them is rough and the other is perfectly smooth. A given body takes 2 times as much time to slide down on the rough surface than on the smooth surface. The coefficient of kinetic friction (\(\mu_k\)) between the object and the rough surface is close to :

The plates of a parallel plate capacitor are separated by d. Two slabs of different dielectric constant \(K_1\) and \(K_2\) with thickness \(d/2\) and \(d/2\) respectively are inserted in the capacitor. Due to this, the capacitance becomes two times larger than when there is nothing between the plates. If \(K_1 = 1.25 K_2\), the value of \(K_2\) is :