>
Mining Engineering
List of top Mining Engineering Questions
A rock specimen was tested under compression. The lateral and longitudinal strains were found to be \(0.8\%\) and \(4\%\) respectively. The Poisson's ratio of the specimen is
TS PGECET - 2026
TS PGECET
Mining Engineering
Geomechanics
The load at which an axially loaded prop reaches its elastic limit or at which it begins to buckle is called
TS PGECET - 2026
TS PGECET
Mining Engineering
Ground Control
If the rock has RMR value \(72\), then what will be its roof classification?
TS PGECET - 2026
TS PGECET
Mining Engineering
Ground Control
An area of \(100\,\text{m}^2\) is measured on a plan having an R.F. of \(\dfrac{1}{800}\). If the R.F. were changed to \(\dfrac{1}{2000}\), the area on the new plan in \(\text{m}^2\) would be
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Surveying
Random errors are best minimized by
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Surveying
The magnetic bearing of a line AB is \(S\,32^\circ E\) and the magnetic declination is \(4^\circ E\). What is the true bearing of the line AB?
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Surveying
A transition curve is provided to
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Surveying
The load on a prop when the upper member is beginning to slide is called
TS PGECET - 2026
TS PGECET
Mining Engineering
Ground Control
In a Mohr--Coulomb failure criterion, the ratio of the uniaxial compressive strength to the tensile strength is
TS PGECET - 2026
TS PGECET
Mining Engineering
Geomechanics
In the etch method, the acid used to measure borehole deviation is
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Surveying
Identify the correction to departure of any side in traversing.
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Surveying
Which drilling method is most commonly used in underground metal mines?
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Development
In opencast blasting, delay detonators are used to
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Methods
The term “Powder Factor” refers to
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Methods
In the freezing method of shaft sinking, the cooling liquid used for circulation is
TS PGECET - 2026
TS PGECET
Mining Engineering
Mine Development
The texture of igneous rocks depends mainly on
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Geology
The mineral commonly used in the manufacture of cement is
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Geology
Which rock is a sedimentary rock?
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Geology
Schist is a metamorphic rock characterized by
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Geology
The example for foliated metamorphic rock is
TS PGECET - 2026
TS PGECET
Mining Engineering
Mining Geology
In CPM method of network analysis the Critical activities are associated with
AP ECET Mining Engg - 2025
AP ECET Mining Engg
Mining Engineering
Mine planning and its components
Which one of the following is a principle of TQM ?
AP ECET Mining Engg - 2025
AP ECET Mining Engg
Mining Engineering
Mine planning and its components
In a PERT network for an activity Pessimistic, Most likely, and Optimistic times are 8 days, 6 days and 4 days respectively. The expected duration of the activity is _______
AP ECET Mining Engg - 2025
AP ECET Mining Engg
Mining Engineering
Mine planning and its components
For a person working in Opencast mine the rate at which leave with wages calculated is
AP ECET Mining Engg - 2025
AP ECET Mining Engg
Mining Engineering
Mine legislation
The time by which activity completion time can be delayed without affecting start of succeeding activity
AP ECET Mining Engg - 2025
AP ECET Mining Engg
Mining Engineering
Mine planning and its components
Prev
1
...
7
8
9
10
11
...
18
Next