>
MHT CET
>
Physics
List of top Physics Questions asked in MHT CET
When a resistance of \(200\,\Omega\) is connected in series with a galvanometer of resistance G, its range is V. To triple its range, a resistance of \(2000\,\Omega\) is connected in series. The value of G is
MHT CET - 2026
MHT CET
Physics
The Moving Coil Galvanometer
A wire is under tension of \(2\) kg wt and a wave is travelling through it with some speed. Tension in the wire is so increased that the wave travels through it with thrice the original speed. The increase in tension is (in kg wt)
MHT CET - 2026
MHT CET
Physics
Waves
A small sphere oscillates simple harmonically in a watch glass whose radius of curvature is \(1.6\) m. The period of Oscillation of the sphere is (Acceleration due to gravity \(g = 10\text{ m/s}^2\))
MHT CET - 2026
MHT CET
Physics
simple harmonic motion
The number of lines of force originating from a point charge of \(2\times 8.85\times 10^{-9}\) C in a medium of dielectric constant \(10\) is (\(ε_0 = 8.85\times 10^{-12}\) SI unit)
MHT CET - 2026
MHT CET
Physics
Gauss Law
A Pipe open at one end has length \(0.8\) m. At the open end of the tube a string \(0.5\) m long is vibrating in its first overtone and resonates with fundamental frequency of pipe. If tension in the string is \(50\) N, the mass of string is (Neglect end correction) (Speed of sound \(= 320\) m/s)
MHT CET - 2026
MHT CET
Physics
Waves
The fundamental frequency of sonometer wire is \(50\) Hz for some length and tension. If the length is increased by \(25\%\) by keeping the tension same, then the frequency change of second harmonic is
MHT CET - 2026
MHT CET
Physics
Vibrating Wire and Frequency
A sonometer wire resonates with \(4\) antinodes between the two bridges for a given tuning fork when \(1\) kg mass is suspended from the wire. Using same fork, when mass M is suspended, the wire resonates producing \(2\) antinodes between the two bridges. (Distance between the bridges as before) The value of M is
MHT CET - 2026
MHT CET
Physics
Vibrating Wire and Frequency
A particle executes linear S.H.M. with amplitude \(4\) cm. The magnitude of velocity and acceleration is equal when it is at \(3\) cm from mean position. Time period is
MHT CET - 2026
MHT CET
Physics
simple harmonic motion
The average force applied on the walls of a closed container depends on temperature (T) as (T is the temperature of an ideal gas)
MHT CET - 2026
MHT CET
Physics
The Kinetic Theory of Gases
A monoatomic gas is stored in a thermally insulated container and the gas is suddenly compressed to \((\frac{1}{8})^{th}\) of its initial volume. The ratio of final pressure to initial pressure is
MHT CET - 2026
MHT CET
Physics
Thermodynamics
In thermodynamic isobaric process
MHT CET - 2026
MHT CET
Physics
Thermodynamics
A particle starts from mean position and performs S.H.M. with period \(6\) second. At what time its kinetic energy is \(50\%\) of total energy? (\(cos45^{\circ} = 1/\sqrt{2}\))
MHT CET - 2026
MHT CET
Physics
Energy in simple harmonic motion
About black body radiation, which one of the following is a WRONG statement?
MHT CET - 2026
MHT CET
Physics
radiation
What should be the angular velocity of earth due to rotation about its own axis so that the weight at equator becomes \((\frac{3}{5})^{th}\) of initial value? (\(g =\) acceleration due to gravity, R = radius of earth)
MHT CET - 2026
MHT CET
Physics
Gravitation
A soap bubble of radius R is blown. After heating the solution, a second bubble of radius 2R is blown. The work required to blow the second bubble in comparison to that required for the first bubble is
MHT CET - 2026
MHT CET
Physics
Surface Tension
An ordinary body cools from \(4θ\) to \(3θ\) in 't' minutes. The temperature of the body after next 't' minutes is (Assume Newton's law of cooling and room temperature as \(θ\))
MHT CET - 2026
MHT CET
Physics
Newtons Law of Cooling
Water rises to a height \(3\) cm in a capillary tube. If cross-sectional area of capillary tube is reduced to \(1/3^{rd}\) of its initial area then water will rise to a height of
MHT CET - 2026
MHT CET
Physics
Surface Tension
A black disc has a radius 'R' and wavelength corresponding to the maximum intensity is '\(λ\)'. The emissive power (E) for the different radii and maximum wavelengths is directly proportional to
MHT CET - 2026
MHT CET
Physics
radiation
The excess pressure inside the first soap bubble of radius \(R_1\) is three times that inside the second soap bubble of radius \(R_2\). The ratio of volumes of the first bubble to second bubble is
MHT CET - 2026
MHT CET
Physics
Surface Tension
Two masses \(m_1\) and \(m_2\) moving with velocities \(V_1\) and \(V_2\) in opposite directions collide elastically and after collision \(m_1\) and \(m_2\) move with velocities \(V_2\) and \(V_1\) respectively. The ratio \(\frac{m_2}{m_1}\) is
MHT CET - 2026
MHT CET
Physics
Elastic and inelastic collisions
If the earth suddenly contracts to \((\frac{1}{3})^{rd}\) of its present size without change in its mass, the ratio kinetic energy of the earth after and before contraction will be (Earth is assumed to be a rotating sphere about itself)
MHT CET - 2026
MHT CET
Physics
Rotational Mechanics
A particle performing U.C.M. of radius \(\frac{π}{2}\) m makes 'x' revolutions in time t. Its tangential velocity is
MHT CET - 2026
MHT CET
Physics
Uniform Circular Motion
The power (P) is supplied to rotating body having moment of inertia 'I' and angular acceleration '\(α\)'. Its instantaneous angular velocity is
MHT CET - 2026
MHT CET
Physics
Rotational motion
The length of rod is measured by meter scale having least count \(0.1\) cm and diameter is measured by vernier callipers having least count \(0.01\) cm. Length of rod is \(5.0\) cm and radius \(2.0\) cm. The percentage error in the calculated value of the volume is
MHT CET - 2026
MHT CET
Physics
Error Analysis
If transistor having \(α = 0.9\), is used in CE configuration, then for a change of \(0.4\) mA in base current, what will be the change in collector current?
MHT CET - 2026
MHT CET
Physics
Transistors
Prev
1
...
67
68
69
70
71
...
215
Next