List of top Questions asked in CUET (PG)

In the pigment printing:
• [A.] binder forms film on the surface
• [B.] pigment has no affinity for cotton
• [C.] steaming is mandatory for fixation
• [D.] curing is essential Choose the correct answer from the options given below:

The nonwoven fabrics manufactured using different bonding techniques are:
A. mechanical bonding
B. covalent bonding
C. chemical bonding
D. thermal bonding Choose the correct answer from the options given below :

In the knitted fabric manufacturing, the types of needles used are:
A. latch needle
B. sewing needle
C. compound needle
D. bearded needle Choose the correct answer from the options given below:

The dye exhaustion of direct dyeing with cotton depends on :
A. electrolytic concentration
B. temperature of dye bath
C. pH of dye bath
D. oxidizing agents Choose the correct answer from the options given below:

The amplitude of drafting wave depends on
A. draft
B. hank number
C. settings of drafting rollers
D. immature fibres Choose the correct answer from the options given below:

In comparison with woven fabric, the knitted fabric with same GSM is:
A. stiffer and has harsh feel
B. more stretchable
C. more thicker
D. more porous Choose the correct answer from the options given below:

The most commonly used fabric manufacturing methods are:
A. splicing
B. weaving
C. knitting
D. non-woven Choose the correct answer from the options given below:

The transmission of moisture from body to atmosphere depends on
A. body exertion rate
B. environmental humidity and temperature
C. clothing parameters
D. human psychology Choose the correct answer from the options given below:

What are the factors affecting the air permeability of fabric?
A. weave
B. yarn twist
C. yarn strength
D. cover factor Choose the correct answer from the options given below:

The abrasion resistance of fabric is affected by
A. fabric length
B. fabric cover factor
C. fabric weave
D. yarn crimp Choose the correct answer from the options given below :

The high volume instrument gives
A. span length and bundle strength
B. colour of cotton
C. micronaire value and maturity ratio
D. honeydew in cotton Choose the correct answer from the options given below:

The essential requirements of fibre formation are
A. molecular orientation
B. linear polymer and strong lateral bonds
C. three dimensional polymers
D. crystalline and amorphous regions Choose the correct answer from the options given below :

Arrange the following weaves according to increasing number of heald frames required.
A. jacquard design
B. $3/1$ regular twill
C. honey comb weave
D. plain weave
E. 5-shaft satin Choose the correct answer from the options given below :

During yarn formation on the ring frame, the cotton material passes through:
A. back roller
B. ring bobbin
C. delivery roller
D. traveller
E. lappet guide Choose the correct answer from the options given below :

The sequence of machines for flow of cotton in ring spinning process is:
A. speed frame
B. blow Room
C. carding
D. draw frame
E. ring frame Choose the correct answer from the options given below :

The differential scanning calorimetry gives
A. crystallization temperature $(T_{c})$
B. glass transition temperature $(T_{g})$
C. dyeing temperature $(T_{dv})$
D. melting temperature $(T_{m})$ Choose the correct answer from the options given below:

The sequence of warp preparation for weaving is:
A. warping
B. sizing
C. winding
D. drawing and denting in
E. weaving Choose the correct answer from the options given below: