List of top Civil Engineering Questions asked in AP PGECET

The maximum ruling gradient in a rolling terrain according to IRC can be
Heating of solid wastes in an oxygen free atmosphere is called
Greenhouse effect is considered to be due to the increased levels of
Aerobic biochemical treatment of sewage effluent is essentially a process of
The design factors which are critical for an activated sludge treatment plant are
Under normal conditions, the percentage of BOD removal during primary treatment is about
The hydraulic mean radius of a circular sewer of diameter \(D\) is given by
What type of dam is constructed using the hydraulic fill method?
Separation of solid wastes of different densities is done by
What type of canal is aligned along the natural watershed line?
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
The technical term used to relate the volume of water and the area of crop it matures is
Which kind of light energy is effectively absorbed by \(\mathrm{CO_2}\) in the lower boundary of the Troposphere?
The ratio of the weight of water consumed from various sources by a plant in order to produce one unit weight of plant above the root zone is called
The type of flow, if \(\dfrac{\partial v}{\partial s}=0\), is
Flow over a spillway of a dam is to be treated as
What is the non-dimensional number that results when the ratio of inertia force to gravity force is considered?
Pressure inside the casing of an impulse turbine is
Hydraulic jump is
What is the value of the included angle between two adjacent sides of the absolute best hydraulic trapezoidal open channel?
The shear strength for a structural clay from the unconfined compression test is
When a retaining wall moves away from the backfill, the pressure exerted on the wall is termed as
Quick sand condition occurs when
During CBR test, the load sustained by a re-moulded soil specimen at \(5\,\mathrm{mm}\) penetration is \(50\,\mathrm{kg}\). The CBR value of the soil will be
The earth pressure distribution on braced sheeting is based on