Question:
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
Show Hint
Relationship:
\[
\boxed{
\text{GCA}
=
\text{CCA}
+
\text{Uncultivable Area}
}
\]
where CCA is the Cultivable Command Area.
Updated On: Jul 24, 2026
- Area to be irrigated
- Cultivable command area
- Gross command area
- Gross irrigated area
Show Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Step 1: Recall the definition of Gross Command Area (GCA).
Gross Command Area is the total area enclosed within the irrigation project boundary.
It includes:
- Cultivable land
- Uncultivable land (roads, villages, forests, rivers, etc.)
Step 2: Identify the correct option. Hence, \[ \boxed{\text{Gross Command Area (GCA)}} \] is the correct answer. Therefore, \[ \boxed{(C)} \] is the correct answer.
Step 2: Identify the correct option. Hence, \[ \boxed{\text{Gross Command Area (GCA)}} \] is the correct answer. Therefore, \[ \boxed{(C)} \] is the correct answer.
Was this answer helpful?
0
0
Top AP PGECET Civil Engineering Questions
The elongation of a conical bar of length L under the action of its own weight is ___ that of a prismatic bar of the same length.
- A steel cylinder of diameter 100 mm and a copper tube of an outer diameter 200 mm are compressed between the plates of a press. If the ratio of their moduli (steel to copper) is 15/8, what is the ratio of their stresses in steel (\( \sigma_s \)) and copper (\( \sigma_c \))?
- In ___\ bending, the direction of the neutral axis will not be perpendicular to the plane of bending.
- If the thin cylindrical shell having diameter \( D \) and subjected to internal pressure \( p \), the ratio of longitudinal pressure to hoop stress is equal to
- The maximum shear stress in a Mohr’s stress circle is equal to
View More Questions
Top AP PGECET Irrigation Engineering and Hydraulic Structures Questions
- The optimum depth of kaw-watering for rice crop is
- In a 1:100 scale model of a harbour, the time which will correspond to the prototype tidal period of 12 hours will be ............
- If atmospheric pressure head is 9 m, vapour pressure head (maximum) is 1 m, failure head is 40 m and cavitation coefficient \( \sigma \) is 0.15, then height at which the turbine can be set above the tailrace level is ...........
- A drainage basin has an area of 210 km$^2$. The average depth of rainfall received by it during a monsoon period is computed as 65 cm, while the runoff measured at its outlet during the same period is estimated to be $5.68 \times 10^7$ m$^3$. What percentage of rainfall has become runoff?
- What should be the diameter of an open well to give a safe yield of 4.8 l/s? Assume working head as 3.75 m and sub soil consists of fine sand of \( C = 0.5\ \text{h}^{-1} \).
View More Questions
Top AP PGECET Questions
- If 125V is applied across a 250V, 100W incandescent bulb, the power consumed will be _____ .
- The power consumed by a coil is 300 watts when connected to a 30V DC source and 108 watts when connected to a 30V AC source. The reactance of the coil is ____ .
The supply voltage magnitude \( |V| \) of the circuit shown below is ____ .
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- Which of the following theorems is the dual of Norton’s theorem?
View More Questions