>
AP PGECET
List of top Questions asked in AP PGECET
Greenhouse effect is considered to be due to the increased levels of
AP PGECET - 2026
AP PGECET
Civil Engineering
Environmental Engineering
Heating of solid wastes in an oxygen free atmosphere is called
AP PGECET - 2026
AP PGECET
Civil Engineering
Municipal solid waste management
What type of dam is constructed using the hydraulic fill method?
AP PGECET - 2026
AP PGECET
Civil Engineering
Irrigation Engineering and Hydraulic Structures
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
AP PGECET - 2026
AP PGECET
Civil Engineering
Irrigation Engineering and Hydraulic Structures
What type of canal is aligned along the natural watershed line?
AP PGECET - 2026
AP PGECET
Civil Engineering
Irrigation Engineering and Hydraulic Structures
Which kind of light energy is effectively absorbed by \(\mathrm{CO_2}\) in the lower boundary of the Troposphere?
AP PGECET - 2026
AP PGECET
Civil Engineering
Meteorological Scale
Separation of solid wastes of different densities is done by
AP PGECET - 2026
AP PGECET
Civil Engineering
Municipal solid waste management
The technical term used to relate the volume of water and the area of crop it matures is
AP PGECET - 2026
AP PGECET
Civil Engineering
Irrigation Engineering and Hydraulic Structures
Flow over a spillway of a dam is to be treated as
AP PGECET - 2026
AP PGECET
Civil Engineering
Irrigation Engineering and Hydraulic Structures
Pressure inside the casing of an impulse turbine is
AP PGECET - 2026
AP PGECET
Civil Engineering
Hydraulic
The ratio of the weight of water consumed from various sources by a plant in order to produce one unit weight of plant above the root zone is called
AP PGECET - 2026
AP PGECET
Civil Engineering
Irrigation Engineering and Hydraulic Structures
What is the value of the included angle between two adjacent sides of the absolute best hydraulic trapezoidal open channel?
AP PGECET - 2026
AP PGECET
Civil Engineering
Hydraulic
Hydraulic jump is
AP PGECET - 2026
AP PGECET
Civil Engineering
Hydraulic
What is the non-dimensional number that results when the ratio of inertia force to gravity force is considered?
AP PGECET - 2026
AP PGECET
Civil Engineering
Hydraulic
The type of flow, if \(\dfrac{\partial v}{\partial s}=0\), is
AP PGECET - 2026
AP PGECET
Civil Engineering
Fluid Mechanics
The failure of the bottom of a deep excavation in sand due to the lowering of the water level inside relative to the outside is due to the phenomenon of
AP PGECET - 2026
AP PGECET
Civil Engineering
Geotechnical Engineering
The earth pressure distribution on braced sheeting is based on
AP PGECET - 2026
AP PGECET
Civil Engineering
Geotechnical Engineering
The shear strength for a structural clay from the unconfined compression test is
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
During CBR test, the load sustained by a re-moulded soil specimen at \(5\,\mathrm{mm}\) penetration is \(50\,\mathrm{kg}\). The CBR value of the soil will be
AP PGECET - 2026
AP PGECET
Civil Engineering
Geotechnical Engineering
When a retaining wall moves away from the backfill, the pressure exerted on the wall is termed as
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
Quick sand condition occurs when
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
A clay deposit suffers a total settlement of \(4\,\mathrm{cm}\) with one-way drainage. With two-way drainage, it suffers a total settlement of
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
The pore water pressure in the capillary zone is
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
Textural classifications are merely based on
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
The best method for compaction of cohesion-less soils is
AP PGECET - 2026
AP PGECET
Civil Engineering
Soil Mechanics
Prev
1
...
8
9
10
11
12
...
206
Next