Question:
Which process does not occur through convection?
Which process does not occur through convection?
Show Hint
Convection only occurs in fluids, not solids.
Updated On: Apr 23, 2026
- boiling of water
- land and sea breeze
- circulation of air around furnace
- heating of glass bulb through filament
Show Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Concept:
Convection requires fluid motion.
Step 1: Check options
(A),(B),(C) involve fluid flow $\Rightarrow$ convection (D) filament heats glass mainly by radiation/conduction Conclusion: (D)
Step 1: Check options
(A),(B),(C) involve fluid flow $\Rightarrow$ convection (D) filament heats glass mainly by radiation/conduction Conclusion: (D)
Was this answer helpful?
0
0
Top MET Physics Questions
- A coil of 100 turns and area $2 \times 10^{-2}m^2 $ is pivoted about a vertical diameter in a uniform magnetic field and carries a current of 5A. When the coil is held with its plane in north-south direction, it experiences a couple of 0.33 Nm. When the plane is east-west, the corresponding couple is 0.4 Nm, the value of magnetic induction is [Neglect earth's magnetic field]
- Radiation, with wavelength 6561 $?$ falls on a metal surface to produce photoelectrons. The electrons are made to enter a uniform magnetic field of $3 \times 10^{-4} T$. If the radius of the largest circular path followed by the electrons is 10 mm, the work function of the metal is close to :
- In intrinsic semiconductor at room temperature number of electrons and holes are
- A rope of mass $0.1\, kg$ is connected at the same height of two opposite walls. It is allowed to hang under its own weight. At [he contact point between the rope and the wall, the rope makes an angle $ \theta =10^{\circ} $ with respect to horizontal. The tension in the rope at its midpoint between the walls is
- At great distances from an electric dipole, the electric field strength due to the dipole varies with the distance as
View More Questions
Top MET Calorimetry Questions
- 1 \( \text{cm}^3 \) of water at its boiling point absorbs 540 cal of heat to become steam with a volume of 1671 \( \text{cm}^3 \). If the atmospheric pressure \( = 1.013 \times 10^5 \, \text{N/m}^2 \) and the mechanical equivalent of heat \( = 4.19 \, \text{J/cal} \), the energy spent in this process in overcoming intermolecular forces is
- Liquid is filled in a flask. On heating, what happens to liquid level?
- Two rods (one semi-circular and other straight) of same material and cross-section are joined. The ratio of heat transferred through semi-circular rod to straight rod is graphics[width=0.45\linewidth]{PHYSICS/QP21.png}
- 2 L water heated from \(27^\circ C\) to \(77^\circ C\), power = 160 J/s. Find time.
Top MET Questions
- A coil of 100 turns and area $2 \times 10^{-2}m^2 $ is pivoted about a vertical diameter in a uniform magnetic field and carries a current of 5A. When the coil is held with its plane in north-south direction, it experiences a couple of 0.33 Nm. When the plane is east-west, the corresponding couple is 0.4 Nm, the value of magnetic induction is [Neglect earth's magnetic field]
- $\int\limits_{0}^{8}| x -5| d x$ is equal to
- Radiation, with wavelength 6561 $?$ falls on a metal surface to produce photoelectrons. The electrons are made to enter a uniform magnetic field of $3 \times 10^{-4} T$. If the radius of the largest circular path followed by the electrons is 10 mm, the work function of the metal is close to :
- In intrinsic semiconductor at room temperature number of electrons and holes are
- Which of the following product is formed in the reaction $ CH_3MgBr {->[(i)CO_2][(ii)H_2O]} ? $
View More Questions