Which of the following would give a linear plot? (K is the rate constant of an elementary reaction and T is the temperature in absolute scale)
- k vs T
- k vs \(\frac{1}{T}\)
- ln k vs T
- ln k vs \(\frac{1}{T}\)
The Correct Option is D
Solution and Explanation
To determine which gives a linear plot, we use the Arrhenius equation:
$k = A e^{-E_a / RT}$
Taking natural logarithm on both sides:
$\ln k = \ln A - \frac{E_a}{R} \cdot \frac{1}{T}$
This is in the form of a straight line: $y = mx + c$, where:
- $y$ = $\ln k$
- $x$ = $\frac{1}{T}$
- $m$ = $-\frac{E_a}{R}$ (slope)
- $c$ = $\ln A$ (intercept)
Therefore, a plot of $\ln k$ vs $\frac{1}{T}$ gives a straight line.
The correct answer is option (D): ln k vs $\frac{1}{T}$
Top Questions on Chemical Kinetics
- For a reaction : \( N_2 + 3H_2 \rightarrow 2NH_3 \), the rate of reaction with respect to \( NH_3 \) is
- CBSE CLASS XII - 2026
- Chemistry
- Chemical Kinetics
- Following reaction takes place in one step :
\( 2A + B \rightarrow 2C \)
How will the rate of above reaction change if the volume of the reaction vessel is decreased to one third of its original volume? Will there be any change in the order of reaction with the reduced volume?
- CBSE CLASS XII - 2026
- Chemistry
- Chemical Kinetics
- The half-life of a first-order reaction depends on:
- KBPE - 2026
- Chemistry
- Chemical Kinetics
- The initial concentration of the first order reaction:
N2O5 (g) → 2NO2 (g) + 1/2 O2 (g)
was 1.24 × 10⁻² mol L⁻¹ at 300 K. The concentration of N2O5 after 60 minutes was 0.20 × 10⁻² mol L⁻¹.
Calculate the rate constant of the reaction at 300 K.- KBPE - 2026
- Chemistry
- Chemical Kinetics
(i) Write any two differences between order and molecularity.
(ii) What do you mean by pseudo order reaction?- KBPE - 2026
- Chemistry
- Chemical Kinetics
Questions Asked in WBJEE exam
What are the charges stored in the \( 1\,\mu\text{F} \) and \( 2\,\mu\text{F} \) capacitors in the circuit once current becomes steady?
- WBJEE - 2026
- Capacitors and Capacitance
Which one among the following compounds will most readily be dehydrated under acidic condition?
- WBJEE - 2026
- Organic Reactions
Manufacturers supply a zener diode with zener voltage \( V_z=5.6\,\text{V} \) and maximum power dissipation \( P_{\max}=\frac14\,\text{W} \). This zener diode is used in the circuit shown. Calculate the minimum value of the resistance \( R_s \) so that the zener diode will not burn when the input voltage is \( V_{in}=10\,\text{V} \).
- WBJEE - 2026
- Zener Diodes
Two charges \( +q \) and \( -q \) are placed at points \( A \) and \( B \) respectively which are at a distance \( 2L \) apart. \( C \) is the midpoint of \( AB \). The work done in moving a charge \( +Q \) along the semicircle CSD (\( W_1 \)) and along the line CBD (\( W_2 \)) are
- WBJEE - 2026
- electrostatic potential and capacitance
A piece of granite floats at the interface of mercury and water. If the densities of granite, water and mercury are \( \rho, \rho_1, \rho_2 \) respectively, the ratio of volume of granite in water to that in mercury is
- WBJEE - 2026
- Buoyancy and Floatation
Concepts Used:
Chemical Kinetics
Chemical kinetics is the description of the rate of a chemical reaction. This is the rate at which the reactants are transformed into products. This may take place by abiotic or by biological systems, such as microbial metabolism.
Rate of a Chemical Reaction:
The speed of a reaction or the rate of a reaction can be defined as the change in concentration of a reactant or product in unit time. To be more specific, it can be expressed in terms of: (i) the rate of decrease in the concentration of any one of the reactants, or (ii) the rate of increase in concentration of any one of the products. Consider a hypothetical reaction, assuming that the volume of the system remains constant. R → P
Read More: Chemical Kinetics MCQ
Factors Affecting The Reaction Rate:
- The concentration of Reactants - According to collision theory, which is discussed later, reactant molecules collide with each other to form products.
- Nature of the Reactants - The reaction rate also depends on the types of substances that are reacting.
- Physical State of Reactants - The physical state of a reactant whether it is solid, liquid, or gas can greatly affect the rate of change.
- Surface Area of Reactants - When two or more reactants are in the same phase of fluid, their particles collide more often than when either or both are in the solid phase or when they are in a heterogeneous mixture. In a heterogeneous medium, the collision between the particles occurs at an interface between phases. Compared to the homogeneous case, the number of collisions between reactants per unit time is significantly reduced, and so is the reaction rate.
- Temperature - If the temperature is increased, the number of collisions between reactant molecules per second. Increases, thereby increasing the rate of the reaction.
- Effect Of Solvent - The nature of the solvent also depends on the reaction rate of the solute particles.
- Catalyst - Catalysts alter the rate of the reaction by changing the reaction mechanism.