Question:
The chute feed system is beneficial over the formation of lap due to
The chute feed system is beneficial over the formation of lap due to
Show Hint
Chute feeding turned a manual "batch" process into a continuous "streamline" process, greatly improving mill efficiency.
Updated On: May 26, 2026
- effective trash removal
- direct feeding of fibres to carding
- blending of fibres
- breakage of fibres
Show Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Concept:
The Blowroom is the department where cotton is opened and cleaned. Traditionally, the output of the Blowroom was a "Lap"—a compressed, rolled-up sheet of cotton that workers had to manually transport to the Carding machine.
Step 1: The Chute Feed Mechanism.
The Chute Feed System is a modern, automated method where opened tufts of cotton are transported through pneumatic pipes (air ducts). These tufts are dropped into a vertical "chute" located at the back of each Carding machine.
Step 2: Advantages of Direct Feeding.
The system allows for the direct feeding of fibres to carding. This provides several benefits:
• It eliminates the manual labor involved in carrying heavy laps.
• It avoids "lap licking" (fibres sticking together) and lap thickness variations.
• It ensures a continuous and highly uniform flow of material, which is essential for high-production carding.
Step 1: The Chute Feed Mechanism.
The Chute Feed System is a modern, automated method where opened tufts of cotton are transported through pneumatic pipes (air ducts). These tufts are dropped into a vertical "chute" located at the back of each Carding machine.
Step 2: Advantages of Direct Feeding.
The system allows for the direct feeding of fibres to carding. This provides several benefits:
• It eliminates the manual labor involved in carrying heavy laps.
• It avoids "lap licking" (fibres sticking together) and lap thickness variations.
• It ensures a continuous and highly uniform flow of material, which is essential for high-production carding.
Was this answer helpful?
0
0
Top CUET PG Textile Engineering Questions
- In \(\underline{\hspace{2cm}}\), the package is driven in frictional contact with the drum.
- In \(\underline{\hspace{2cm}}\), the yarn passes through two plates in which one plate is the baseplate and the other is a weighing plate.
- In case of plain weave fabric, the respective warp and weft counts are 30 tex and 20 tex, with 40 ends per cm and 30 picks per cm. The warp has 10% crimp and weft also 10% crimp. Calculate the weight of fabric in grams/square meter.
- In \(\underline{\hspace{2cm}}\) system, a warping beam with a complex pattern of colored stripes is obtained.
In the slasher sizing machine, the principle involved in drying the wet warp sheet by physical contact with a hot drum surface is \(\underline{\hspace{2cm}}\)
View More Questions
Top CUET PG Yarn Manufacturing Questions
- On a \(\underline{\hspace{2cm}}\) machine, two or more single yarns are plied and twisted together.
- The sequence of machines for flow of cotton in ring spinning process is:
A. speed frame
B. blow Room
C. carding
D. draw frame
E. ring frame Choose the correct answer from the options given below : Match List - I with List - II.
List - I (Process) List - II (End product) A. Blow Room
B. Carding
C. Speed Frame
D. Ring FrameI. Roving
II. Ring Yarn
III. Lap
IV. Sliver
Top CUET PG Questions
- Given below are two statements:
Statement I: For Plato the meaning of the word 'Justice' is basically a conception in the mind only.
Statement II: For Plato the meaning of the word 'Justice' is fixed, mind-independently
In the light of the above statements, choose the correct answer from the options given below: - What is the electron count of OS6CO182-?
- XeF4 hydrolysis gives A + B, HF, and Oxygen. Find A and B
- What is more basic in pyrol and pyridine?
- Hydrolysis of Al2C3, Be2?
View More Questions