Question

Sequentially arrange the steps involved in the manufacturing of two piece can (drawn and wall ironed): A. Drawn into shallow cup B. Disc cut from the coil C. Redrawn into smaller diameter cup D. Finished can trimmed to required length E. Wall thinning by ironing process

• A. B, A, C, E, D
• B. A, B, C, E, D
• C. B, A, E, C, D
• D. B, A, D, E, C

Hint:

Always ensure that each step in the manufacturing process is completed before moving on to the next one to maintain quality and efficiency.

Answer 1

The Correct Option is A

Step 1: Concept
The sequential steps in the manufacturing process involve starting with a metal disc from a coil, shaping it into a cup through drawing, reducing its diameter further by redrawing, thinning the walls using an ironing process, and finally trimming to the required length.

Step 2: Meaning
Understanding the correct sequence of operations ensures efficient production and quality control in can manufacturing.

Step 3: Analysis
1. B (Disc cut from the coil): The process begins with cutting a metal disc from a continuous coil. 2. A (Drawn into shallow cup): The disc is then drawn to form a shallow cup, which is the first step in shaping the can body. 3. C (Redrawn into smaller diameter cup): To achieve the desired shape and size of the can, the shallow cup undergoes redrawing to reduce its diameter further. 4. E (Wall thinning by ironing process): The walls are then thinned through an ironing process to ensure the can has the right thickness for strength and durability. 5. D (Finished can trimmed to required length): Finally, the can is trimmed to the desired length. The sequence B, A, C, E, D correctly follows these steps in order without skipping any necessary operations or adding extra ones that are not part of the manufacturing process.

Step 4: Conclusion
The correct sequence for manufacturing a two piece can (drawn and wall ironed) involves cutting the disc from the coil first, then drawing it into a shallow cup, redrawing to reduce its diameter further, thinning the walls by ironing, and finally trimming the finished can to the required length. Final Answer: (A)