Question:
Match List - I with List - II.
Choose the correct answer from the options given below:
Match List - I with List - II.
Choose the correct answer from the options given below:
Choose the correct answer from the options given below:
Show Hint
Flexibility Method is used when the static indeterminacy ($D_s$) is low. Stiffness Method is used when the kinematic indeterminacy ($D_k$) is low.
Updated On: May 20, 2026
- A-II, B-I, C-IV, D-III
- A-IV, B-II, C-III, D-I
- A-III, B-IV, C-II, D-I
- A-I, B-IV, C-II, D-III
Show Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Concept:
Structural analysis methods are broadly classified into Force Methods (Flexibility) and Displacement Methods (Stiffness).
Step 1: Analyze Force and Displacement methods.
• Flexibility Method (A): Also known as the force method, it treats Redundant forces (II) as the basic unknowns.
• Stiffness Method (B): Also known as the displacement method, it treats the Degree of Freedom (I) or displacements as the basic unknowns.
Step 2: Analyze iterative methods.
• Kani's Method (C): An iterative method that evaluates Displacements, rotations, and sway (IV) specifically for plane frames.
• Moment Distribution Method (D): Evaluates Rotations and unknown sway (III) through successive approximations of moments at joints.
Step 1: Analyze Force and Displacement methods.
• Flexibility Method (A): Also known as the force method, it treats Redundant forces (II) as the basic unknowns.
• Stiffness Method (B): Also known as the displacement method, it treats the Degree of Freedom (I) or displacements as the basic unknowns.
Step 2: Analyze iterative methods.
• Kani's Method (C): An iterative method that evaluates Displacements, rotations, and sway (IV) specifically for plane frames.
• Moment Distribution Method (D): Evaluates Rotations and unknown sway (III) through successive approximations of moments at joints.
Was this answer helpful?
0
0
Top CUET PG Civil Structural and Transport Engineering Questions
The solution(s) of the ordinary differential equation $y'' + y = 0$, is:
(A) $\cos x$
(B) $\sin x$
(C) $1 + \cos x$
(D) $1 + \sin x$
Choose the most appropriate answer from the options given below:For the matrix, $A = \begin{bmatrix} -4 & 0 \\ -1.6 & 4 \end{bmatrix}$, the eigenvalues ($\lambda$) and eigenvectors ($X$) respectively are:
The value of $\iint_S \vec{F} \cdot \vec{N} \, ds$ where $\vec{F} = 2x^2y \hat{i} - y^2 \hat{j} + 4xz^2 \hat{k}$ and $S$ is the closed surface of the region in the first octant bounded by the cylinder $y^2 + z^2 = 9$ and the planes $x = 0, x = 2, y = 0, z = 0$, is:
The value of the integral $\displaystyle \oint_C \frac{z^3 - 6}{2z - i} \, dz$, where $C: |z| \leq 1$, is:
- In a Binomial distribution, the sum of its mean and variance is $1.8$. If the event was conducted $5$ times, then the probability of two successes is:
View More Questions
Top CUET PG Materials and Structural Systems Questions
For the frame shown in the figure below, the maximum moment in the left column shall be (Assuming Moment of Inertia (I) of all the members is same):
- Match LIST-I with LIST-II: \[\begin{array}{|c|l|} \hline \textbf{LIST-I (Assumption/ theorem)} & \textbf{LIST-II (Type of analysis/ strength determination)} \\ \hline \text{A. Plane section remains plane before and after bending} & \text{I. Elastic analysis and superposition} \\ \hline \text{B. Material is elastic and deformations/ deflection is small} & \text{II. Linear strain distribution} \\ \hline \text{C. Uniqueness theorem} & \text{III. Non-linear analysis and buckling load} \\ \hline \text{D. Large deformation} & \text{IV. Collapse load} \\ \hline \end{array}\] Choose the most appropriate match from the options given below:
- Match LIST-I with LIST-II:\[\begin{array}{|c|c|} \hline \textbf{LIST-I (Type of structure)} & \textbf{LIST-II (Structural behavior)} \\ \hline \text{A. Truss} & \text{I. Bending} \\ \hline \text{B. Beam} & \text{II. Twisting} \\ \hline \text{C. Column} & \text{IV. Buckling} \\ \hline \text{D. Shaft} & \text{III. Shortening} \\ \hline \end{array}\] Choose the most appropriate match from the options given below:
- Match List - I with List - II.
Choose the correct answer from the options given below : - Given below are two statements: one is labelled as Assertion (A) and the other is labelled as Reason (R).
Assertion (A): Whole circle bearing of a line is preferred to a quadrantal bearing.
Reason (R): Bearing is completely specified by an angle.
In the light of the above statements, choose the most appropriate answer from the options given below:
Top CUET PG Questions
- Given below are two statements:
Statement I: For Plato the meaning of the word 'Justice' is basically a conception in the mind only.
Statement II: For Plato the meaning of the word 'Justice' is fixed, mind-independently
In the light of the above statements, choose the correct answer from the options given below: - What is the electron count of OS6CO182-?
- XeF4 hydrolysis gives A + B, HF, and Oxygen. Find A and B
- What is more basic in pyrol and pyridine?
- Hydrolysis of Al2C3, Be2?
View More Questions