Two charges \( +q \) and \( -q \) are placed at points \( A \) and \( B \) respectively which are at a distance \( 2L \) apart. \( C \) is the midpoint of \( AB \). The work done in moving a charge \( +Q \) along the semicircle CSD (\( W_1 \)) and along the line CBD (\( W_2 \)) are 
Find work done in bringing charge q = 3nC from infinity to point A as shown in the figure : 
A substance 'X' (1.5 g) dissolved in 150 g of a solvent 'Y' (molar mass = 300 g mol$^{-1}$) led to an elevation of the boiling point by 0.5 K. The relative lowering in the vapour pressure of the solvent 'Y' is $____________ \(\times 10^{-2}\). (nearest integer)
[Given : $K_{b}$ of the solvent = 5.0 K kg mol$^{-1}$]
Assume the solution to be dilute and no association or dissociation of X takes place in solution.
Inductance of a coil with \(10^4\) turns is \(10\,\text{mH}\) and it is connected to a DC source of \(10\,\text{V}\) with internal resistance \(10\,\Omega\). The energy density in the inductor when the current reaches \( \left(\frac{1}{e}\right) \) of its maximum value is \[ \alpha \pi \times \frac{1}{e^2}\ \text{J m}^{-3}. \] The value of \( \alpha \) is _________.
\[ (\mu_0 = 4\pi \times 10^{-7}\ \text{TmA}^{-1}) \]
A small block of mass \(m\) slides down from the top of a frictionless inclined surface, while the inclined plane is moving towards left with constant acceleration \(a_0\). The angle between the inclined plane and ground is \(\theta\) and its base length is \(L\). Assuming that initially the small block is at the top of the inclined plane, the time it takes to reach the lowest point of the inclined plane is _______. 
The potential of a point is defined as the work done per unit charge that results in bringing a charge from infinity to a certain point.
Some major things that we should know about electric potential:
The ability of a capacitor of holding the energy in form of an electric charge is defined as capacitance. Similarly, we can also say that capacitance is the storing ability of capacitors, and the unit in which they are measured is “farads”.
Read More: Electrostatic Potential and Capacitance
Both the Capacitors C1 and C2 can easily get connected in series. When the capacitors are connected in series then the total capacitance that is Ctotal is less than any one of the capacitor’s capacitance.
Both Capacitor C1 and C2 are connected in parallel. When the capacitors are connected parallelly then the total capacitance that is Ctotal is any one of the capacitor’s capacitance.