A logic gate circuit has two inputs A and B and output Y. The voltage waveforms of A, B and Y are shown below.

The logic gate circuit is :
To determine the logic gate circuit, we need to analyze the given voltage waveforms for inputs A, B, and output Y:
Fig. Logic gate circuit
From the waveform:
This behavior is consistent with an AND gate, which outputs high only when all its inputs are high.
Verification Against Options:
Therefore, the logic gate circuit is indeed an AND gate.
The correct answer is (A) : AND gate
On the basis of given graph, following table is possible.
| A | B | C |
| 0 | 0 | 0 |
| 1 | 1 | 1 |
| 0 | 1 | 0 |
| 1 | 0 | 0 |
From waveforms and above table, it is an AND gate.
Which logic gate is represented by the following combinations of logic gates?



The logic gate equivalent to the circuit given in the figure is
The heat generated in 1 minute between points A and B in the given circuit, when a battery of 9 V with internal resistance of 1 \(\Omega\) is connected across these points is ______ J. 
The given circuit works as: 
Let the lines $L_1 : \vec r = \hat i + 2\hat j + 3\hat k + \lambda(2\hat i + 3\hat j + 4\hat k)$, $\lambda \in \mathbb{R}$ and $L_2 : \vec r = (4\hat i + \hat j) + \mu(5\hat i + + 2\hat j + \hat k)$, $\mu \in \mathbb{R}$ intersect at the point $R$. Let $P$ and $Q$ be the points lying on lines $L_1$ and $L_2$, respectively, such that $|PR|=\sqrt{29}$ and $|PQ|=\sqrt{\frac{47}{3}}$. If the point $P$ lies in the first octant, then $27(QR)^2$ is equal to}
It is the gate, where a circuit performs an AND operation. It has n number of input where (n >= 2) and one output.
It is the gate, where a circuit performs an OR operation. It has n number of input where (n >= 2) and one output.
An inverter is also called NOT Gate. It has one input and one output where the input is A and the output is Y.
A NAND operation is also called a NOT-AND operation. It has n number of input where (n >= 2) and one output.
A NOR operation is also called a NOT-OR operation. It has n number of input where (n >= 2) and one output.
XOR or Ex-OR gate is a specific type of gate that can be used in the half adder, full adder, and subtractor.
XNOR gate is a specific type of gate, which can be used in the half adder, full adder, and subtractor. The exclusive-NOR gate is flattened as an EX-NOR gate or sometimes as an X-NOR gate. It has n number of input (n >= 2) and one output.