List of top Physics Questions asked in JEE Main

A ball of mass \(0.15\) \(kg\) hits the wall with its initial speed of \(12\) \(ms^{–1}\) and bounces back without changing its initial speed. If the force applied by the wall on the ball during the contact is \(100\) \(N\), calculate the time duration of the contact of ball with the wall.
A body is projected vertically upwards from the surface of earth with a velocity equal to one third of escape velocity. The maximum height attained by the body will be:
The percentage decrease in the weight of a rocket, when taken to a height of 32 km above the surface of earth will, be:
(Radius of earth = 6400 km)
Two planets A and B of equal mass are having their period of revolutions TA andTB such that TA= 2TB. These planets are revolving in the circular orbits of radii rA and rB respectively. Which out of the following would be the correct relationship of their orbits?
The area of cross section of the rope used to lift a load by a crane is \(2.5 × 10^{–4}\) \(m^2\). The maximum lifting capacity of the crane is \(10\) metric tons. To increase the lifting capacity of the crane to \(25\) metric tons, The required area of cross section of the rope should be
The elongation of a wire on the surface of the earth is 10–4m. The same wire of same dimensions is elongated by 6 × 10–5m on another planet. The acceleration due to gravity on the planet will be ___ ms–2. (Take acceleration due to gravity on the surface of earth = 10 ms–2)
A body of mass m is projected with velocity λve in vertically upward direction from the surface of the earth into space. It is given that ve is escape velocity and λ< 1. If air resistance is considered to be negligible, then the maximum height from the centre of earth, to which the body can go, will be:
(R : radius of earth)
Two objects of equal masses placed at certain distance from each other attracts each other with a force of F. If one-third mass of one object is transferred to the other object, then the new force will be
As shown in the figure, after passing through the medium 1. The speed of light v2 in medium 2 will be: (Given \(c = 3 \times 10^8 ms^{-1}\))
speed of light v2 in medium 2
In normal adjustment, for a refracting telescope, the distance between objective and eye piece is $30\,cm$ The focal length of the objective, when the angular magnification of the telescope is 2, will be:
A light wave travelling linearly in a medium of dielectric constant 4, incidents on the horizontal interface separating medium with air. The angle of incidence for which the total intensity of incident wave will be reflected back into the same medium will be:
(Given : relative permeability of medium μr = 1)
A signal of 100 THz frequency can be transmitted with maximum efficiency by :
The difference of speed of light in the two media A and B(υA – υB) is 2.6 × 107 m/s. If the refractive index of medium B is 1.47, then the ratio of refractive index of medium B to medium A is: (Given: speed of light in vacuum C = 3 × 108 ms–1)
A parallel beam of light of wavelength 900 nm and intensity 100 Wm–2 is incident on a surface perpendicular to the beam. The number of photons crossing 1 cm–2 area perpendicular to the beam in one second is
The refracting angle of prism is A and refractive index of material of prism is $\cot \frac{A}{2}$ The angle of minimum deviation is
The aperture of the objective is 24.4 cm. The resolving power of this telescope, if a light of wavelength 2440 Å is used to see the object will be:
A small bulb is placed at the bottom of a tank containing water to a depth of √7 m. The refractive index of water is 4/3. The area of the surface of water through which light from the bulb can emerge out is xπ m2. The value of x is ________.

A thin prism of angle 6° and refractive index for yellow light (nY)1.5 is combined with another prism of angle 5° and nY = 1.55. The combination produces no dispersion. The net average deviation (δ) produced by the combination is (1/x)°. The value of x is __________.

Fig. Prism
A microscope was initially placed in air (refractive index 1). It is then immersed in oil (refractive index 2). For a light whose wavelength in air is λ, calculate the change of microscope’s resolving power due to oil and choose the correct option.

A 8 V Zener diode along with a series resistance R is connected across a 20 V supply (as shown in the figure). If the maximum Zener current is 25 mA, then the minimum value of R will be ____ Ω.

A 8 V Zener diode along with a series resistance R is connected across a

The ratio of specific heats 

\((\frac{c_p}{c_v}) \)

in terms of degree of freedom (f) is given by:

Two identical charged particles each having a mass 10 g and charge \(2.0 × 10^{–7}\) C are placed on a horizontal table with a separation of L between them such that they stay in limited equilibrium. If the coefficient of friction between each particle and the table is \(0.25\), find the value of L. [Use g = \(10\) \(ms^{–2}\)]

A system of two blocks of masses m = 2 kg and M = 8 kg is placed on a smooth table as shown in the figure. The coefficient of static friction between two blocks is 0.5. The maximum horizontal force F that can be applied to the block of mass M so that the blocks move together will be
A system of two blocks of masses m = 2 kg and M = 8 kg is placed on a smooth table
A block of mass 2 kg moving on a horizontal surface with speed of 4 ms–1 enters a rough surface ranging from x = 0.5 m to x = 1.5 m. The retarding force in this range of rough surface is related to distance by F = –kx where k = 12 Nm–1. The speed of the block as it just crosses the rough surface will be
Two masses \(M_1\) and \(M_2\) are tied together at the two ends of a light inextensible string that passes over a frictionless pulley. When the mass \(M_2\) is twice that of \(M_1\), the acceleration of the system is \(a_1\). When the mass \(M_2\) is thrice that of \(M_1\), the acceleration of the system is \(a_2\). The ratio \(\frac{a_1}{a_2}\) will be