List of top Civil Engineering Questions asked in TS PGECET

The range of sound level of a jet aircraft at take-off stage is around
The slurry from a biogas plant is used as a
Under normal conditions, the percentage of BOD removal during primary treatment is about
The design factors which are critical for an activated sludge treatment plant are
The maximum ruling gradient in a rolling terrain according to IRC can be
The hydraulic mean radius of a circular sewer of diameter \(D\) is given by
Heating of solid wastes in an oxygen free atmosphere is called
Aerobic biochemical treatment of sewage effluent is essentially a process of
What type of canal is aligned along the natural watershed line?
Which kind of light energy is effectively absorbed by \(\mathrm{CO_2}\) in the lower boundary of the Troposphere?
Separation of solid wastes of different densities is done by
The ratio of the weight of water consumed from various sources by a plant in order to produce one unit weight of plant above the root zone is called
The technical term used to relate the volume of water and the area of crop it matures is
What type of dam is constructed using the hydraulic fill method?
Total area of land in the irrigation boundary of a project (including the zones which can be cultivated and which cannot be cultivated) is known as
Pressure inside the casing of an impulse turbine is
Hydraulic jump is
Flow over a spillway of a dam is to be treated as
What is the value of the included angle between two adjacent sides of the absolute best hydraulic trapezoidal open channel?
What is the non-dimensional number that results when the ratio of inertia force to gravity force is considered?
The type of flow, if \(\dfrac{\partial v}{\partial s}=0\), is
Quick sand condition occurs when
The failure of the bottom of a deep excavation in sand due to the lowering of the water level inside relative to the outside is due to the phenomenon of
When a retaining wall moves away from the backfill, the pressure exerted on the wall is termed as
The earth pressure distribution on braced sheeting is based on