List of top Questions asked in TS PGECET- 2026

The area under the linear curve of stress-strain diagram with in the elastic limit is known as
Which one of the following metal has maximum value of yield strength?
An air conditioning system mixes 30% fresh air at 35 $^\circ$C DBT and 50% RH with 70% recirculated air at 35 $^\circ$C DBT and 50% RH. Which of the following statements about "mixed air condition" is true?
The whirl component of turbine blades is zero for the following turbine.
A single stage impulse turbine with a diameter of 1.2 m runs at 3000 rpm. If the blade speed ratio is 0.42, the inlet velocity of steam will be (in $\text{ms}^{-1}$)
In order to increase the corrosion resistance of stainless steel, the following element is added
If the material has the tendency to fracture without any appreciable deformation is known as
If regenerator is added to a Brayton cycle, the thermal efficiency is improved due to
Generally, in spark ignition engines, the compression ratio cannot be enhanced beyond certain limit because to avoid
In a CI engine, the delay period in the combustion process mainly corresponds to
The refrigerant and absorbent used in Vapour absorption refrigeration system respectively are
A balloon containing an ideal gas is initially kept in an evacuated and insulated room. If the balloon ruptures and the gas fills the entire room, what is the correct statement at the end of the process?
Based on second law of thermodynamics the loss in available energy is being quantified as
The clearance is provided in the reciprocating compressor with clearance ratio of ‘k'. If the pressure ratio is \(\frac{P_2}{P_1}\), then the volumetric efficiency in terms of clearance ratio k, is
In an axial flow compressor, if the air stream is not able to follow the blade contour such phenomena is known as
In an ideal Brayton power cycle operated for the gas turbine plant, if \(T_1\) is the minimum temperature, \(T_3\) is the maximum temperature and pressure ratio is \(r_p\), then the net work ratio is given as
A real gas undergoes throttling from 50 bar to 10 bar from an initial temperature of 300 K. If \(\mu_{JT} = -0.05 \text{ K/bar}\) for the initial condition, what is the approximate value of the exit temperature?
A mixture of gas expands from \(0.03 \text{ m}^3\) to \(0.06 \text{ m}^3\) at a constant pressure of 1 MPa and absorbs 84 kJ of heat during the process. The change in internal energy of the mixture is
Two reversible heat engines are operated with same heat input and heat output. One of the engine is operated between the temperature limits of \(T_2\) and 200 K & another is between 800 K and \(T_2\). Then the value of \(T_2\) is
If a substance is perfect crystal and existing at absolute zero K, then the specific entropy of the substance is
The maximum amount of low grade energy, which is convertible into work is known as
If the surface temperature of hot body is doubled, then rate of radiation energy emitted will be enhanced by a factor of
Expansion bellows are provided in the shell and tube heat exchangers in order to
On the specified surface, if \(35 \%\) of incident radiation energy is reflected and the transmissivity of the body is \(0.3\), then the emissivity of the surface is
In a combined cycle for power generation, if the topping cycle has an efficiency of 45% and for bottoming cycle 30%, then the combined efficiency of the cycle is