List of top Questions asked in TS PGECET- 2026

The correct order of series of operations to be carried out in production planning control is:

Which type of jig is generally used for machining in more than one plane without changing the setting?

Which of the following parameters is NOT the essential requirement for accuracy of the measurement with the sine bar?

The instrument used for the direct measurement of surface quality by dragging a stylus across the surface is:

As per the Indian standards, the limits and fits specify how many grades of tolerances?

The main purpose of an Automatic Tool Changer (ATC) in CNC machining process is to reduce:

According to the Taylor's tool life equation, if the cutting speed is halved with index \( n = 0.25 \), then the tool life:

The Titanium Nitride or Titanium Carbonitride coated cutting tools are majorly used to

As the cutting speed increases, how do the machining cost and tooling cost behave?

A device/mechanism used to position a work piece in the same position, cycle after the cycle is called

The vacuum is a mandatory requirement for which of the following non traditional machining process?

The welding process used for joining railway tracks is

What is the key requirement for an adhesive to properly bond to a surface?

The phenomenon where a metal part tends to partially return to its original shape after the forming tool is removed is known as

The secondary operation which is used to improve the self-lubricating capacity of the sintered part in powder metallurgy is

In MIG welding process, the commonly used gases for shielding are

In casting process, the covering passage is used for feeding the liquid metal into the mould to

A low projection on the drag surface of a casting commencing near the gate by erosion of sand due to the high velocity liquid metal in the bottom gating. This defect is known as:

The shrinkage allowance has been provided on the pattern to compensate the shrinkage when:

The commonly used casting process for producing intricate and detailed sculptures is:

While designing the gating system, the ratio of 1 : 2 : 4 represents:

The extrusion process used to manufacture the short length components like paste tubes, gun shells etc., is

In a linearly hardening plastic material, the true stress beyond the initial yielding

Based on Iron-Carbon diagram, when austenite decomposes during cooling process, an eutectoid mixture is formed. The nature of the element is

The heat treatment process used to enrich the steel surface by addition of Nitrogen is known as