Question:
Which of the following method(s) is/are generally used in spark ignition engines for evaluating volatility?
Which of the following method(s) is/are generally used in spark ignition engines for evaluating volatility?
Show Hint
To evaluate the volatility of fuels, methods like the distillation test and Reid vapor pressure test are commonly used in spark ignition engines. These tests provide valuable data on how fuels will behave under different temperature conditions.
Updated On: Apr 14, 2025
- Distillation test
- Motor method
- Pensky Martens closed tester
- Reid vapor pressure test
Show Solution
Verified By Collegedunia
The Correct Option is A, D
Solution and Explanation
The volatility of fuels used in spark ignition engines is important for their performance and combustion. Let's break down the methods:
(A) Distillation test: This is correct. The distillation test is used to determine the volatility of fuels by measuring the temperatures at which specific portions of the fuel evaporate. This helps assess the fuel's behavior under different temperatures.
(B) Motor method: This is incorrect for evaluating volatility. The motor method is used to assess the performance of fuels in terms of engine power, not volatility.
(C) Pensky Martens closed tester: This method measures the flash point of a fuel, which is related to its safety properties but is not primarily used to assess the overall volatility in spark ignition engines. Therefore, this is not the correct answer.
(D) Reid vapor pressure test: This is correct. The Reid vapor pressure test measures the vapor pressure of a fuel, which directly correlates with its volatility. It’s a key method for evaluating the volatility of fuels in spark ignition engines.
Thus, the correct answers are: (A) and (D).
(A) Distillation test: This is correct. The distillation test is used to determine the volatility of fuels by measuring the temperatures at which specific portions of the fuel evaporate. This helps assess the fuel's behavior under different temperatures.
(B) Motor method: This is incorrect for evaluating volatility. The motor method is used to assess the performance of fuels in terms of engine power, not volatility.
(C) Pensky Martens closed tester: This method measures the flash point of a fuel, which is related to its safety properties but is not primarily used to assess the overall volatility in spark ignition engines. Therefore, this is not the correct answer.
(D) Reid vapor pressure test: This is correct. The Reid vapor pressure test measures the vapor pressure of a fuel, which directly correlates with its volatility. It’s a key method for evaluating the volatility of fuels in spark ignition engines.
Thus, the correct answers are: (A) and (D).
Was this answer helpful?
0
0
Top GATE AG Farm Power Questions
Match the terms in Column I with the suitable hydrometeorological variables in Column II.
- A four-stroke diesel engine has a displacement volume of 6.0 L and it operates at 2300 rpm with 75% mechanical efficiency. The indicated mean effective pressure is 800 kPa. If the engine has brake-specific fuel consumption of 320 g.h\(^{-1}\).kW\(^{-1}\), considering calorific value of the fuel as 44.6 MJ.kg\(^{-1}\), the fuel equivalent power is _________ kW. (Rounded off to 2 decimal places)
- An engine, running at 1200 rpm, drives a 1.2 m diameter rigid wheel on a non-deformable surface at 5 km/h forward speed. The power is transmitted from the engine to the wheel through a transmission gearbox (gear ratio = 3:1), a differential (gear ratio = 4:1), and a final drive (gear ratio = n:1). Neglecting the deformation of the wheel and wheel slip, the value of \(n\) is __________ (Rounded off to 2 decimal places)
- Locust beans having an average particle diameter of 7 mm are ground at a rate of 10 ton/h to produce an average particle diameter of 0.62 mm. The mill consumes 6.7 kW power at the given rate. For the same rate of grinding, using Rittinger’s law, the power required to grind the beans to an average particle diameter of 0.25 mm is _________kW. (Rounded off to 2 decimal places)
- A mixture of Nitrogen (N\(_2\)) and Helium (He) gases is contained in a pipe at 1.0 atm pressure and at 298 K. At one point in the pipe, the partial pressure of N\(_2\) is 60.80 kPa and at a point 0.22 m apart, the partial pressure of N\(_2\) is 20.31 kPa. The diffusion coefficient of the mixture is \(0.612 \times 10^{-4}\) m\(^2\).s\(^{-1}\). Considering Universal gas constant as 8314 m\(^3\).Pa.kg mol\(^{-1}\).K\(^{-1}\), the steady-state flux of N\(_2\) is \(n \times 10^{-6}\) kg mol.s\(^{-1}\).m\(^{-2}\). The value of \(n\) is _________ (Rounded off to 2 decimal places)
View More Questions
Top GATE AG Hydrometeorological Variables Questions
Match the terms in Column I with the suitable hydrometeorological variables in Column II.
- Match the Columns: \[ \begin{array}{|c|c|} \hline I & II
\hline 1. \; \text{Tensiometer} & a. \; \text{Consumptive use}
2. \; \text{Piezometer} & b. \; \text{Bernoulli's equation}
3. \; \text{Lysimeter} & c. \; \text{Soil moisture}
4. \; \text{Elbow meter} & d. \; \text{Hydrostatic pressure}
5. \; \text{Pitot tube} & e. \; \text{Volumetric flow rate}
\hline \end{array} \] - The information needed for estimating the design flood using Rational formula is:
- The ordinates of a 6-hour S-hydrograph of a catchment are given in the table. The catchment has phi-index of 0.25 cm h\(^{-1}\) and baseflow of 10.5 m\(^3\)/s. The peak of the flood hydrograph generated from this catchment due to a storm of 45 mm received during the first 6 h in m\(^3\)/s is: \[ \begin{array}{|c|c|} \hline \text{Time (h)} & 0 6 12 18 24 30 36 42 48
\hline \text{Ordinate (m}^3/s\text{)} & 0 30 90 180 252 306 342 360 360
\hline \end{array} \] - A solar photovoltaic system receives radiations between 400–750 W/m\(^2\). Efficiency = 14%. Cell parameters: \(V_{oc} = 21.6 \, V\), \(I_{sc} = 3.22 \, A\), fill factor = 0.72. Find minimum cell area required to generate 10 kW power.
Top GATE AG Questions
- If \(a\), \(b\), and \(c\) are the roots of \( 2x^3 - 3x^2 + px - 1 = 0 \) and the sum of two roots is 1, the value of \(p\) is:
- If the matrix \[ \begin{pmatrix} x & -3 \\ 2 & x - 5 \end{pmatrix} \] is singular, sum of the values of \( x \) is:
- The Laplace transform of \( \frac{s}{s^2 + a^2} \) is:
The equation \[ y'' + p(x)y' + q(x)y = r(x) \] is a _________ ordinary differential equation.
- The median of the following set of numbers: 154, 130, 144, 137, 156, 146, 138, 149, 160, 138 is:
View More Questions