Question:

When an inductor '\[L\]' and a resistor '\[R\]' in series are connected across a \[15 \mathrm{~V}, 50 \mathrm{~Hz}\] a.c. supply, a current of \[0.3 \mathrm{~A}\] flows in the circuit. The current differs in phase from applied voltage by \[\left(\frac{\pi}{3}\right)^c\]. The value of '\[R\]' is \[\left(\sin \frac{\pi}{6}=\cos \frac{\pi}{3}=\frac{1}{2}, \sin \frac{\pi}{3}=\cos \frac{\pi}{6}=\frac{\sqrt{3}}{2}\right)\]

Show Hint

The impedance follows from rms voltage over current. The resistance is the impedance times the cosine of the phase angle.
Updated On: Nov 17, 2026
  • \(10\Omega\)
  • \(15\Omega\)
  • \(20\Omega\)
  • \(25\Omega\)
Show Solution
collegedunia
Verified By Collegedunia

The Correct Option is D

Solution and Explanation

Step 1: Understanding the Concept
\(Z=\dfrac{V}{I}\) and \(R=Z\cos\phi\) in a series LR circuit.

Step 2: Impedance
\(Z=\dfrac{15}{0.3}=50\ \Omega\)

Step 3: Resistance
\(\phi=\dfrac{\pi}{3}\Rightarrow\cos\phi=\dfrac{1}{2}\)
\(R=50\times\dfrac{1}{2}=25\ \Omega\)

Final Answer:
The resistance is 25 ohm. \[ \boxed{\text{(D) }25\ \Omega} \]
Was this answer helpful?
0
0