Question:
Two copper wires of length $L$ and $2L$ have radii $r$ and $2r$ respectively. If they are subjected to the same tension force, the ratio of their extension ($\Delta L_1 / \Delta L_2$) is:
Two copper wires of length $L$ and $2L$ have radii $r$ and $2r$ respectively. If they are subjected to the same tension force, the ratio of their extension ($\Delta L_1 / \Delta L_2$) is:
Show Hint
Use proportionality directly: $\Delta L \propto \frac{L}{r^2}$. Doubling the length doubles the extension, but doubling the radius quarter-sizes it. Net change is $2 \times \frac{1}{4} = \frac{1}{2}$, meaning the second wire stretches half as much.
Updated On: May 31, 2026
- $2 : 1$
- $1 : 2$
- $1 : 1$
- $4 : 1$
Show Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Step 1: Concept
According to Hooke's Law, Young's modulus is $Y = \frac{\text{Stress}}{\text{Strain}} = \frac{F/A}{\Delta L / L}$. Rearranging, the elongation is given by $\Delta L = \frac{FL}{AY} = \frac{FL}{\pi r^2 Y}$.
Step 2: Meaning
Since both wires are made of the same material (copper), they have the same Young's Modulus $Y$. The applied tension force $F$ is also identical.
Step 3: Analysis
Elongation is proportional to: \[ \Delta L \propto \frac{L}{r^2} \] For the first wire: \[ \Delta L_1 \propto \frac{L}{r^2} \] For the second wire: \[ \Delta L_2 \propto \frac{2L}{(2r)^2} = \frac{2L}{4r^2} = \frac{1}{2} \frac{L}{r^2} \] Taking the ratio: \[ \frac{\Delta L_1}{\Delta L_2} = \frac{1}{\frac{1}{2}} = 2 \implies \Delta L_1 : \Delta L_2 = 2 : 1 \]
Step 4: Conclusion
The ratio of their extension is $2 : 1$. Final Answer: (A)
Was this answer helpful?
0
0
Top AP EAPCET Physics Questions
- A body is projected from the ground at an angle of $\tan^{-1} \left( \frac{8}{7}\right)$ with the horizontal. The ratio of the maximum height attained by it to its range is
- A lens forms real and virtual images of an object, when the object is at $u_{1}$ and $u_{2}$ distances respectively. If the size of the virtual image is double that of the real image, then the focal length of the lens is (take, the magnification of the real image as $m$ )
- Two spheres $P$ and $Q$, each of mass $200\, g$ are attached to a string of length one metre as shown in the figure. The string and the spheres are then whirled in a horizontal circle about $O$ at a constant angular speed. The ratio of the tension in the string between $P$ and $Q$ to that of between $P$ and $O$ is $(P$ is at mid-point of the line joining $O$ and $Q$ )
- The radii of the two columns in a U - tube are r1 and r2. When a liquid of density p (angle of contact is $ 0{}^\circ $ ) is filled in it, the level difference of the liquid in the two arms is h. The surface tension of the liquid is: (g = acceleration due to gravity)
- A rigid metallic sphere is spinning around its own axis in the absence of external torque. If the temperature is raised, its volume increases by $9 \%$. The change in its angular speed is
View More Questions
Top AP EAPCET Stress and Strain Questions
Top AP EAPCET Questions
- A body is projected from the ground at an angle of $\tan^{-1} \left( \frac{8}{7}\right)$ with the horizontal. The ratio of the maximum height attained by it to its range is
- The four quantum numbers of the valence electron of potassium are :
- A lens forms real and virtual images of an object, when the object is at $u_{1}$ and $u_{2}$ distances respectively. If the size of the virtual image is double that of the real image, then the focal length of the lens is (take, the magnification of the real image as $m$ )
- Two spheres $P$ and $Q$, each of mass $200\, g$ are attached to a string of length one metre as shown in the figure. The string and the spheres are then whirled in a horizontal circle about $O$ at a constant angular speed. The ratio of the tension in the string between $P$ and $Q$ to that of between $P$ and $O$ is $(P$ is at mid-point of the line joining $O$ and $Q$ )
- The volume of $0.02\, M$ acidified permanganate solution required for complete reaction of $60\, mL$ of $0.01\, MI^{-}$ ion solution to form $I_2$ in $mL$ is
View More Questions