Question:
The twist in a 36 Ne cotton yarn is 15 tpi. The twist multiplier (TM) in cotton system of the yarn (correct to 1 decimal place) is _________.
The twist in a 36 Ne cotton yarn is 15 tpi. The twist multiplier (TM) in cotton system of the yarn (correct to 1 decimal place) is _________.
Show Hint
The twist multiplier (TM) is calculated as the twist per inch (TPI) divided by the square root of the yarn count in Ne.
Updated On: Apr 28, 2025
Show Solution
Verified By Collegedunia
Solution and Explanation
Step 1: Formula for Twist Multiplier (TM). The twist multiplier (TM) is calculated using the formula: \[ TM = \frac{{TPI}}{\sqrt{{Yarn Count}}} \] Where: - TPI is the twist per inch (given as 15 tpi), - Yarn Count is given in Ne (36 Ne).
Step 2: Calculating the Twist Multiplier. Substituting the given values: \[ TM = \frac{15}{\sqrt{36}} = \frac{15}{6} = 2.5 \] Step 3: Conclusion. Thus, the twist multiplier (TM) of the yarn is \( \boxed{2.5} \).
Was this answer helpful?
0
0
Top GATE TF Textile Engineering and Fibre Science Questions
- Amongst the following polymers, the one with the lowest glass transition temperature is
- Amongst the following fibre forming polymers, the one which is synthesised by chain growth polymerisation is
- The purpose of opening in blowroom is
- Amongst the following, forward as well as reverse rotary motion in cotton combing is given to
- A circular weft knitting machine with 24 inch gauge and 20 inch diameter needle bed is used to make a tubular knitted fabric. If the fabric shrinks by 35% in course- wise direction upon withdrawal from the machine, the circumference (inch) of the shrunk tubular fabric is approximately
View More Questions
Top GATE TF Yarn Manufacture, Structure and Properties Questions
- A winder operates at 750 m/min with 93% efficiency. The time (in minutes) taken for the winder to wind 1.2 kg of 20 tex yarn is approximately _______.
- A cotton yarn of 20 tex count is replaced by a polyester yarn such that both the yarns have the same diameter and the same packing density. Assuming densities of cotton and polyester fibres as 1.52 g/cm\(^3\) and 1.38 g/cm\(^3\), respectively, the count (tex) of the polyester yarn (rounded off to 2 decimal places) is ________________.
- A knitted fabric is prepared from a yarn of 15 tex count. The fabric has 16 courses/cm, 17 wales/cm and 2.6 mm loop length. The areal density (g/m\(^2\)) of the fabric (rounded off to the nearest integer) is ________________.
- Group I lists yarn manufacturing technologies and Group II contains typical structural features of the yarns. Match the manufacturing technology with the structural features of the yarn.
Group I Group II P. Rotor spinning 1. Twistless parallel fibres in core and helically arranged filament on surface Q. Air-jet spinning 2. Helically twisted core and distinct wrappers on surface R. Wrap spinning 3. Multifilament core covered by staple fibres stuck to molten polymer S. Bobtex spinning 4. Twistless core wrapped regularly and helically by thin fibre ribbons - Amongst the given options, the condition(s) which will increase the equilibrium wicking height of water in a yarn is/are
View More Questions
Top GATE TF Questions
- The approximate value of the integral \( \int_{2}^{3} \frac{dx}{x} \) using Simpson's rule with \( h = 0.5 \) is
- The differential equation \( \frac{dy}{dx} = \frac{M(x,y)}{N(x,y)} \) is exact if _______. (
- The value of the integral \( \int_{0}^{\infty} \frac{dx}{e^x + e^{-x}} \) is:
- Amongst the following polymers, the one with the lowest glass transition temperature is
- Amongst the following fibre forming polymers, the one which is synthesised by chain growth polymerisation is
View More Questions