Question:
The surveying method which is carried out with bodies of water for the purpose of navigation, water supply and harbor works is called as _____ .
The surveying method which is carried out with bodies of water for the purpose of navigation, water supply and harbor works is called as _____ .
Show Hint
Hydrographic surveying is critical for planning infrastructure projects involving water bodies, ensuring safe navigation and water management.
Updated On: May 3, 2025
- Topographic surveying
- City surveying
- Cadastral surveying
- Hydrographic surveying
Hide Solution
Verified By Collegedunia
The Correct Option is D
Solution and Explanation
Hydrographic surveying is the method used to map bodies of water for navigation, water supply, and harbor work. It involves measuring the depth of water bodies, identifying underwater features, and mapping water currents.
Was this answer helpful?
0
0
Top Questions on Surveying
- The angle between true north and magnetic north is called:
- The magnetic bearing of line AB is 88°45'. Calculate the true bearing if the magnetic declination is 5°30' east.
- A tape (30 m long) when suspended, has a sag (dip) 'd' of 30.15 cm at the mid-span under a tension of 100 N. The total weight of the tape is given by:
- The plan of an area has shrunk such that a line originally 10 cm, now measures 9.5 cm. If the original scale of the plan was 1 cm = 10 m (R.F. = 1:1000), the shrinkage factor is given as:
- Consider the following characteristics of contour: (A) A uniform slope is indicated when contour lines are spaced uniformly
(B) Contour lines cannot go anywhere but can close on themselves
(C) A set of closed contours indicates a depression or a summit, according to the lower or higher values being respectively inward
(D) A contour is an imaginary line passing through the points of an equal level on the surface of earth
Choose the correct answer from the options given below:
View More Questions
Questions Asked in AP PGECET exam
- The absolute humidity of air at 101.325 kPa is measured to be 0.02 kg of water per kg of dry air. Then the partial pressure of water vapour in the air is:
- AP PGECET - 2025
- Thermodynamics
- If the vapour pressure at two temperatures of a solid phase in equilibrium with its liquid phase is known, then the latent heat of fusion can be calculated by the:
- AP PGECET - 2025
- Thermodynamics
- 1 mole of Argon gas is heated at constant pressure from 200 K to 600 K.
If \( C_p = 4\ \text{cal} \cdot \text{deg}^{-1} \cdot \text{mol}^{-1} \), then the change in entropy will be:
(Given \( \ln 3 = 1.09 \))
- AP PGECET - 2025
- Thermodynamics
- The minimum amount of work required to operate a refrigerator which removes 1000 Cal heat at $0^\circ$C and rejects at $50^\circ$C will be:
- AP PGECET - 2025
- Thermodynamics
- The entropy of single crystalline Silicon at absolute zero will be:
- AP PGECET - 2025
- Thermodynamics
View More Questions