Question:
The resonance tube is filled with a liquid of density higher than that of water, then the resonating frequency
The resonance tube is filled with a liquid of density higher than that of water, then the resonating frequency
Show Hint
The resonating frequency is primarily determined by the speed of sound in the medium inside the resonance tube. Changing the density of the liquid does not affect the resonating frequency significantly.
Updated On: Feb 4, 2026
- may increase or decrease.
- will decrease.
- will not change.
- will increase.
Hide Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Step 1: Understanding resonance frequency.
The resonating frequency in a resonance tube depends on the speed of sound in the medium inside the tube. The speed of sound in a liquid is determined by the properties of the liquid such as its density and elasticity. However, the resonance condition remains valid regardless of the change in the liquid's density, as the speed of sound in the liquid will adjust accordingly to maintain the resonance frequency. Step 2: Conclusion.
Thus, the resonating frequency will remain unchanged when the tube is filled with a liquid that has a higher density than water, which corresponds to option (C).
The resonating frequency in a resonance tube depends on the speed of sound in the medium inside the tube. The speed of sound in a liquid is determined by the properties of the liquid such as its density and elasticity. However, the resonance condition remains valid regardless of the change in the liquid's density, as the speed of sound in the liquid will adjust accordingly to maintain the resonance frequency. Step 2: Conclusion.
Thus, the resonating frequency will remain unchanged when the tube is filled with a liquid that has a higher density than water, which corresponds to option (C).
Was this answer helpful?
0
0
Top Questions on Waves and Oscillations
- The time period of a simple harmonic oscillator is \[ T=2\pi\sqrt{\frac{m}{k}}. \] Measured value of mass \(m\) has an accuracy of \(10%\) and time for 50 oscillations of the spring is found to be \(60\,\text{s}\) using a watch of 2 s resolution. Percentage error in determination of spring constant \(k\) is:
- JEE Main - 2026
- Physics
- Waves and Oscillations
- The displacement of a particle executing simple harmonic motion with time period \(T\) is expressed as \[ x(t)=A\sin\omega t, \] where \(A\) is the amplitude of oscillation. If the maximum value of the potential energy of the oscillator is found at \[ t=\frac{T}{2\beta}, \] then the value of \(\beta\) is ________.
- JEE Main - 2026
- Physics
- Waves and Oscillations
- A cylindrical block of mass $M$ and area of cross section $A$ is floating in a liquid of density $\rho$ with its axis vertical. When depressed a little and released the block starts oscillating. The period of oscillation is ___.
- JEE Main - 2026
- Physics
- Waves and Oscillations
Using a variable frequency ac voltage source the maximum current measured in the given LCR circuit is 50 mA for V = 5 sin (100t) The values of L and R are shown in the figure. The capacitance of the capacitor (C) used is_______ µF.
- JEE Main - 2026
- Physics
- Waves and Oscillations
- Using a simple pendulum experiment $g$ is determined by measuring its time period $T$. Which of the following plots represent the correct relation between the pendulum length $L$ and time period $T$?
- JEE Main - 2026
- Physics
- Waves and Oscillations
View More Questions
Questions Asked in MHT CET exam
- What is the standard electrode potential of the half-reaction: \[ \text{Cu}^{2+} + 2e^- \rightarrow \text{Cu} \, (\text{solid})? \] Given that the standard electrode potential for the half-reaction: \[ \text{Ag}^+ + e^- \rightarrow \text{Ag} \, (\text{solid}) \quad \text{is} \, +0.80 \, \text{V}. \] Also, the cell potential for the following reaction is: \[ \text{Cu}^{2+} + 2\text{Ag} \rightarrow \text{Cu} + 2\text{Ag}^+ \] is \( 0.46 \, \text{V} \).
- MHT CET - 2025
- Electrochemistry
- A cylindrical pipe has a radius of \( 0.1 \, \text{m} \). If the speed of water flowing through the pipe is \( 2 \, \text{m/s} \), calculate the volume flow rate of water through the pipe.
- MHT CET - 2025
- mechanical properties of fluid
- A particle is moving with a constant velocity of 5 m/s in a circular path of radius 2 m. What is the centripetal acceleration of the particle?
- MHT CET - 2025
- centripetal acceleration
- A ball is thrown vertically upwards with an initial velocity of 20 m/s. Calculate the time it takes for the ball to reach the highest point. (Assume \( g = 9.8 \, \text{m/s}^2 \))
- MHT CET - 2025
- laws of motion
- A charge of 2 $\mu C$ is placed in an electric field of intensity \( 4 \times 10^3 \, \text{N/C} \). What is the force experienced by the charge?
- MHT CET - 2025
- Electric charges and fields
View More Questions