Question:
Schering bridge is used to:
Schering bridge is used to:
Show Hint
Think "Schering = Capacitance". It's designed to measure both capacitance and dielectric loss.
Updated On: Jun 24, 2025
- determine capacitance
- determine the inductance
- measure low resistance
- measure mutual inductance
Show Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
The Schering bridge is a type of AC bridge used to measure the value of unknown capacitance.
It is especially useful for measuring small capacitance values and the dielectric loss of capacitors.
It compares the unknown capacitor with a known standard capacitor using balance conditions in the bridge.
Unlike other bridges like Maxwell’s (for inductance) or Kelvin’s (for low resistance), Schering bridge is uniquely suited for capacitive elements.
It is especially useful for measuring small capacitance values and the dielectric loss of capacitors.
It compares the unknown capacitor with a known standard capacitor using balance conditions in the bridge.
Unlike other bridges like Maxwell’s (for inductance) or Kelvin’s (for low resistance), Schering bridge is uniquely suited for capacitive elements.
Was this answer helpful?
0
0
Top AP PGECET Instrumentation Engineering Questions
- What do you mean by duty cycle?
- Typically oscilloscope represents _____ .
- Stray capacitance effects can be minimized by _____ .
- In serial communication, if the time interval to transmit one bit is 10 \(\mu\) sec. What is the time to transmit an 8-bit word?
- A node having only outgoing branches is called as ____ .
View More Questions
Top AP PGECET Electrical and Electronic Measurements Questions
- Stray capacitance effects can be minimized by _____ .
- An ammeter is inserted in ____.
- Which of the following techniques is suitable to measure a leakage resistance of a capacitor?
- Wagner's earth devices are used in a.c. bridge circuits for
- Capacitance can be measured using
View More Questions
Top AP PGECET Questions
- If 125V is applied across a 250V, 100W incandescent bulb, the power consumed will be _____ .
- The power consumed by a coil is 300 watts when connected to a 30V DC source and 108 watts when connected to a 30V AC source. The reactance of the coil is ____ .
The supply voltage magnitude \( |V| \) of the circuit shown below is ____ .
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- Which of the following theorems is the dual of Norton’s theorem?
View More Questions