Question:
Typically oscilloscope represents _____ .
Typically oscilloscope represents _____ .
Show Hint
Oscilloscope Display. Standard mode displays Voltage (Y-axis) against Time (X-axis). Used to visualize and analyze time-varying electrical signals.
Updated On: May 7, 2025
- Current and time
- Resistance and time
- Voltage and time
- Power and time
Show Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
An oscilloscope is an electronic test instrument that graphically displays varying signal voltages
The standard operating mode displays voltage on the vertical (Y) axis versus time on the horizontal (X) axis
The time base is generated internally, sweeping the electron beam horizontally at a constant rate
The input voltage signal deflects the beam vertically
This allows visualization of the waveform's amplitude, frequency, period, and shape over time
While current or other quantities can sometimes be displayed indirectly (e
g
, by measuring voltage across a known resistor for current), the fundamental display is Voltage versus Time
The standard operating mode displays voltage on the vertical (Y) axis versus time on the horizontal (X) axis
The time base is generated internally, sweeping the electron beam horizontally at a constant rate
The input voltage signal deflects the beam vertically
This allows visualization of the waveform's amplitude, frequency, period, and shape over time
While current or other quantities can sometimes be displayed indirectly (e
g
, by measuring voltage across a known resistor for current), the fundamental display is Voltage versus Time
Was this answer helpful?
0
0
Top AP PGECET Instrumentation Engineering Questions
- What do you mean by duty cycle?
- Stray capacitance effects can be minimized by _____ .
- In serial communication, if the time interval to transmit one bit is 10 \(\mu\) sec. What is the time to transmit an 8-bit word?
- A node having only outgoing branches is called as ____ .
- Signal flow graphs:
View More Questions
Top AP PGECET Instrumentation Questions
- In which type of system does power transmission takes place through compressed air?
- What pumps hydraulic oil to the hydraulic circuit?
- The target materials which are suited for X-ray generation are
- Which type of vapour is stored in Mercury lamp ?
When nuclear radiations pass through, gas ionization is produced. This is the principle of which of the following detectors?
View More Questions
Top AP PGECET Questions
- If 125V is applied across a 250V, 100W incandescent bulb, the power consumed will be _____ .
- The power consumed by a coil is 300 watts when connected to a 30V DC source and 108 watts when connected to a 30V AC source. The reactance of the coil is ____ .
The supply voltage magnitude \( |V| \) of the circuit shown below is ____ .
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- Which of the following theorems is the dual of Norton’s theorem?
View More Questions