>
questions
List of practice Questions
Determine the correctness or otherwise of the following Assertion [a] and Reason [r].
[a]: Para-aramid fibres have better mechanical properties as compared to meta-aramid fibres.
[r]: The chemical structure of para-aramid fibres allows them to pack closely.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Yarn Manufacture, Structure and Properties
Molecular weight (g/mol) of polypropylene with a degree of polymerisation of 1000
(rounded off to nearest integer)
is
________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Polymerization methods
Polydispersity index of a polymer is 5 and its weight average molecular weight is 8400 g/mol. The number average molecular weight (g/mol) of the polymer
(in integer)
is
________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Polymerization methods
A three-bladed beater is running with an angular velocity of 600 rpm and delivering material at a rate of 600 kg/h. The number of strikes per kg of delivered material (in integer) is ________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Yarn Manufacture, Structure and Properties
Assume that there is no compression of roving during winding and each coil of a layer is placed directly over the coil of the previous layer. A full roving bobbin consisting of 50 layers of roving is wound on an empty bobbin of 60 mm diameter. If the diameter of the roving is 1 mm, then the diameter (mm) of the full bobbin (in integer) is ________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Yarn Manufacture, Structure and Properties
A yarn is unravelled from a woven fabric specimen of 1 m $\times$ 1 m size. If the length of the straightened yarn is 1.1 m, then the crimp percentage (in integer) is
________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Fabric Manufacture, Structure and Properties
In a projectile loom, the energy stored in a torsion rod just before picking is proportional to \( r^n \). If \( r \) is the radius of the torsion rod, then the value of \( n \) (in integer) is ________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Fabric Manufacture, Structure and Properties
Cusick drape test on a fabric specimen results in a drape coefficient of 0.7. If the total mass of the paper ring is 3.0 g, then the mass (g) of the paper with shaded area (correct up to 1 decimal place) is ________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Fabric Manufacture, Structure and Properties
If moisture regain of polyester and cotton is 0.4 % and 8.5 %, respectively, then moisture regain (%) of 70:30 polyester-cotton blend (correct up to 2 decimal places) is ________________.
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Fabric Manufacture, Structure and Properties
Direct measurement of degree of thickening (\( \theta \)) of cotton fibre is carried out using
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Textile Testing
A relatively flat middle zone in a comb sorter diagram indicates:
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Textile Testing
Scouring and cold mercerisation of cotton are carried out by treatment with aqueous sodium hydroxide. The process parameters that differ in the two processes are:
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Chemical Processing
Woven fabrics can be dyed in open width form in
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Chemical Processing
The determinant of a \( 3 \times 3 \) matrix A is 30. If 2 and 3 are two Eigenvalues of A, then the third Eigenvalue of A (in integer) is ________________.
GATE TF - 2022
GATE TF
Engineering Mathematics
Linear Algebra
A fair coin is tossed five times. The probability of obtaining at most two “HEAD” (correct up to 1 decimal place) is ________________.
GATE TF - 2022
GATE TF
Engineering Mathematics
Probability and Statistics
Cotton fibre has maximum amount of cellulose in
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Textile Fibres and its Classification
High extensibility of wool fibre is due to:
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Textile Fibres and its Classification
In a comber, the component that rotates both in the forward and backward directions is:
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Yarn Manufacture, Structure and Properties
Yarn that has helically twisted fibres at the core and belts/wrappers on the surface is
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Yarn Manufacture, Structure and Properties
The ingredient that is NOT used in sizing formulations is
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Fabric Manufacture, Structure and Properties
The machine that uses ‘Horn gears’ is
GATE TF - 2022
GATE TF
Textile Engineering and Fibre Science
Fabric Manufacture, Structure and Properties
The number of solution(s) of the system of linear equations
\[ x + y + z = 0
x - y + z = 0
x + 2y - z = 0 \]
GATE TF - 2022
GATE TF
Engineering Mathematics
Solutions of linear and non-linear algebraic equations
Find the value of the following limit:
\[ \lim_{x \to 0} \frac{e^{x} - 1}{x^2} \]
GATE TF - 2022
GATE TF
Engineering Mathematics
Limit, continuity and differentiability
An integrating factor of the differential equation
\[ x \, dy + (1 - y) \, dx = 0 \]
is
GATE TF - 2022
GATE TF
Engineering Mathematics
Calculus
Writing too many things on the _____ while teaching could make the students get _____
GATE AE - 2022
GATE AE
GATE GE - 2022
GATE GE
GATE ME - 2022
GATE ME
General Aptitude
English Grammar
Prev
1
...
5281
5282
5283
5284
5285
...
8959
Next