Question:
Kelvin’s double bridge is used for the measurement of:
Kelvin’s double bridge is used for the measurement of:
Show Hint
Use Kelvin’s double bridge when precision low resistance measurement is needed — it cancels out unwanted lead resistance!
Updated On: Jun 24, 2025
- High resistance
- Medium resistance
- Low resistance
- Mega-Ohm range resistance
Show Solution
Verified By Collegedunia
The Correct Option is C
Solution and Explanation
Kelvin’s double bridge is a modified form of the Wheatstone bridge designed specifically for measuring very low resistance values accurately.
It eliminates the effect of lead and contact resistances that can significantly affect the measurement of small resistances.
By introducing additional ratio arms, the bridge can provide better compensation for such unwanted resistances.
This makes the Kelvin’s double bridge ideal for low resistance measurements, typically in milliohm ranges.
It eliminates the effect of lead and contact resistances that can significantly affect the measurement of small resistances.
By introducing additional ratio arms, the bridge can provide better compensation for such unwanted resistances.
This makes the Kelvin’s double bridge ideal for low resistance measurements, typically in milliohm ranges.
Was this answer helpful?
0
0
Top AP PGECET Instrumentation Engineering Questions
- What do you mean by duty cycle?
- Typically oscilloscope represents _____ .
- Stray capacitance effects can be minimized by _____ .
- In serial communication, if the time interval to transmit one bit is 10 \(\mu\) sec. What is the time to transmit an 8-bit word?
- A node having only outgoing branches is called as ____ .
View More Questions
Top AP PGECET Electrical and Electronic Measurements Questions
- Stray capacitance effects can be minimized by _____ .
- An ammeter is inserted in ____.
- Which of the following techniques is suitable to measure a leakage resistance of a capacitor?
- Wagner's earth devices are used in a.c. bridge circuits for
- Capacitance can be measured using
View More Questions
Top AP PGECET Questions
- If 125V is applied across a 250V, 100W incandescent bulb, the power consumed will be _____ .
- The power consumed by a coil is 300 watts when connected to a 30V DC source and 108 watts when connected to a 30V AC source. The reactance of the coil is ____ .
The supply voltage magnitude \( |V| \) of the circuit shown below is ____ .
A two-port network is defined by the relation
\(\text{I}_1 = 5V_1 + 3V_2 \)
\(\text{I}_2 = 2V_1 - 7V_2 \)
The value of \( Z_{12} \) is:- Which of the following theorems is the dual of Norton’s theorem?
View More Questions