Question:
Fixed cost per year and variable cost per hour of a tractor were estimated based on its annual usage of 800 h. The total cost of operation was found to be Rs. 540 per hour. It was later re-estimated and found that the total cost of operation would be Rs. 510 per hour, if the annual hours of use were increased to 1000 h. Considering all the components of annual usage cost to be the same, the variable cost in Rs. per hour would be \(\underline{\hspace{1cm}}\) (answer in integer).
Fixed cost per year and variable cost per hour of a tractor were estimated based on its annual usage of 800 h. The total cost of operation was found to be Rs. 540 per hour. It was later re-estimated and found that the total cost of operation would be Rs. 510 per hour, if the annual hours of use were increased to 1000 h. Considering all the components of annual usage cost to be the same, the variable cost in Rs. per hour would be \(\underline{\hspace{1cm}}\) (answer in integer).
Show Hint
When increasing hours of usage, the variable cost is solved by setting up the total cost equations for both scenarios.
Updated On: Dec 22, 2025
Show Solution
Verified By Collegedunia
Correct Answer: 385
Solution and Explanation
Let the fixed cost per year = \(F\) and the variable cost per hour = \(V\).
For 800 hours: \[ \text{Total cost} = F + 800V = 540 \times 800 = 432000 \] For 1000 hours: \[ \text{Total cost} = F + 1000V = 510 \times 1000 = 510000 \] Subtracting the first equation from the second: \[ (F + 1000V) - (F + 800V) = 510000 - 432000 \] \[ 200V = 78000 \] \[ V = \frac{78000}{200} = 390 \] Thus, the variable cost is \( \boxed{390} \ \text{Rs per hour} \).
For 800 hours: \[ \text{Total cost} = F + 800V = 540 \times 800 = 432000 \] For 1000 hours: \[ \text{Total cost} = F + 1000V = 510 \times 1000 = 510000 \] Subtracting the first equation from the second: \[ (F + 1000V) - (F + 800V) = 510000 - 432000 \] \[ 200V = 78000 \] \[ V = \frac{78000}{200} = 390 \] Thus, the variable cost is \( \boxed{390} \ \text{Rs per hour} \).
Was this answer helpful?
0
0
Top GATE AG Farm Machinery Questions
- Identify the correct statement related to tape correction in chain surveying:
- While studying vertical motion imparted to the base of tractor seat, \( \theta \) (radian) is considered as rotation about tractor’s CG and \( R \) is considered as longitudinal distance from operator’s seat to the tractor’s CG. For a small value of \( \theta \), the term ‘\( R\theta \)’ represents the vertical motion resulting from tractor’s _________
- The nominal radius of the rear wheels of a 2WD tractor is 0.5 m. The rolling radius of the tire is 6% less than the nominal radius. While conducting a field test, if the actual distance covered for 20 revolutions of the rear wheel is found to be 56 m, the rear wheel slip is _________% (Rounded off to 2 decimal places).
- Front wheel pivot points of a 2WD tractor are 1.2 m apart. When making turn on a flat concrete surface, the inner front wheel makes 50$^\circ$ and the outer front wheel makes 35$^\circ$ steering angles. To ensure turning without front wheel skid, the wheel base of the tractor should be _________ m. (Rounded off to 2 decimal places)
- Considering acceleration due to gravity as 9.81 m.s\(^{-2}\) and \( \pi \) as 3.14, the critical speed of a ball mill having 3600 mm mill diameter and 160 mm ball diameter is _________ rpm. (Answer in integer)
View More Questions
Top GATE AG Questions
- If \(a\), \(b\), and \(c\) are the roots of \( 2x^3 - 3x^2 + px - 1 = 0 \) and the sum of two roots is 1, the value of \(p\) is:
- If the matrix \[ \begin{pmatrix} x & -3 \\ 2 & x - 5 \end{pmatrix} \] is singular, sum of the values of \( x \) is:
- The Laplace transform of \( \frac{s}{s^2 + a^2} \) is:
The equation \[ y'' + p(x)y' + q(x)y = r(x) \] is a _________ ordinary differential equation.
- The median of the following set of numbers: 154, 130, 144, 137, 156, 146, 138, 149, 160, 138 is:
View More Questions