Question:
Dropping of seeds in furrow in a continuous flow is known as
Dropping of seeds in furrow in a continuous flow is known as
Show Hint
Associate "continuous flow in a furrow" with a seed drill (Drilling).
Associate "individual holes" with a dibbler (Dibbling).
Associate "individual holes" with a dibbler (Dibbling).
Updated On: Jul 7, 2026
- Dibbling
- Drilling
- Hill dropping
- Broadcasting
Show Solution
Verified By Collegedunia
The Correct Option is B
Solution and Explanation
Step 1: Understanding the Concept:
Sowing methods are categorized based on seed placement patterns, spacing, and mechanical processes.
Step 3: Detailed Explanation:
Let us define each of the sowing methods:
1.
Dibbling: Sowing seeds in small holes made in the soil at regular, measured intervals.
2.
Drilling: Dropping seeds in furrows in a continuous stream at a controlled depth and covering them with soil.
3.
Hill dropping: Placing groups of seeds at uniform spacing intervals along the row.
4.
Broadcasting: Randomly scattering seeds over the soil surface, followed by shallow covering.
Thus, dropping seeds in furrows in a continuous flow is defined as drilling.
Step 4: Final Answer:
The correct option is 2, which corresponds to Drilling.
Sowing methods are categorized based on seed placement patterns, spacing, and mechanical processes.
Step 3: Detailed Explanation:
Let us define each of the sowing methods:
1.
Dibbling: Sowing seeds in small holes made in the soil at regular, measured intervals.
2.
Drilling: Dropping seeds in furrows in a continuous stream at a controlled depth and covering them with soil.
3.
Hill dropping: Placing groups of seeds at uniform spacing intervals along the row.
4.
Broadcasting: Randomly scattering seeds over the soil surface, followed by shallow covering.
Thus, dropping seeds in furrows in a continuous flow is defined as drilling.
Step 4: Final Answer:
The correct option is 2, which corresponds to Drilling.
Was this answer helpful?
0
0
Top ICAR AIEEA Agricultural Engineering and Technology Questions
- Which of the following farm equipment is not going to be utilized during the wheat production?
- On the farm, during paddy land preparation, if one wheel of tractor gets in mud, which of the following mechanism will be useful to take out the tractor from mud by distributing equal amount of traction at both the rear wheels?
- 20 labors engaged in a farm-operation on paddy farm for 6h. In an ideal conditions, how much maximum energy is utilized by labors into the farm?
(A) 8.94 kWh (B) 120 kWh (C) 12 hPh (D) 240 hPh Choose the correct answer from the options given below: - Which of the following farm operations utilizes the stationary source of power?
(A) Irrigation Water Lifting (B) Winnowing (C) Threshing (D) Harvesting (E) Cultivation (F) Transportation Choose the correct answer from the options given below: - Which of the following methods are employed for the estimation of infiltration characteristics of soil for design of irrigation system?
(A) Use of Infiltrometer (B) Measurement of subsidence of free water in a large basin (C) Estimation of accumulated infiltration from water front advance data Choose the correct answer from the options given below:
View More Questions
Top ICAR AIEEA Farm Implements and Equipment Questions
- Which of the following farm equipment is not going to be utilized during the wheat production?
- Which of the following is primary function of seed broadcaster?
- A sample of silt clay has a volume of 15.0 $\text{cm}^3$, total mass of 30.0 g, a dry mass of 27.0 g and specific gravity of 2.7. The void ratio will be:}
- Given below are two statements:
Statement I: The lateral pressure exerted by the soil when the retaining wall moves away from the back fill, is generally known as active earth pressure of the soil.
Statement II: Rankine's theory of earth pressure assumes that the back of the wall is vertical and smooth.
In light of the above statements, choose the most appropriate answer from the options given below: - What percentage of incoming solar radiation on earth is reflected back to space?
View More Questions
Top ICAR AIEEA Questions
- Which of the following statements is false?
- Which of the following is an example of an inventory?
- According to Adam Smith, productivity gains could be brought about through .
- The supply curve for an artificially scarce good is .
- Which of the following would not be considered an opportunity cost of paid employment?
View More Questions