Question:
Consider a pair of insulating blocks with thermal resistances \( R_1 \) and \( R_2 \) as shown in the figure. The temperature \( \theta \) at the boundary between the two blocks is:
Consider a pair of insulating blocks with thermal resistances \( R_1 \) and \( R_2 \) as shown in the figure. The temperature \( \theta \) at the boundary between the two blocks is:
Show Hint
In heat transfer through materials with different thermal resistances, the temperature at the boundary is proportional to the resistances.
Updated On: Jan 12, 2026
- \( \theta_2 = \frac{R_2}{R_1 + R_2} \theta_1 \)
- \( \theta_1 + \theta_2 = \frac{R_1 R_2}{R_1 + R_2} \)
- \( \theta_1 + \theta_2 = \frac{R_1 R_2}{R_1 + R_2} \)
- \( \theta_1 R_2 + R_1 \)
Show Solution
Verified By Collegedunia
The Correct Option is A
Solution and Explanation
Step 1: Understanding thermal resistance.
In a steady-state heat transfer situation, the temperature at the interface is determined by the thermal resistances of the materials. The relation between the temperatures and resistances is: \[ \frac{\theta_2}{\theta_1} = \frac{R_2}{R_1 + R_2} \] Step 2: Conclusion.
Thus, the temperature \( \theta_2 \) at the boundary between the blocks is given by: \[ \theta_2 = \frac{R_2}{R_1 + R_2} \theta_1 \]
Final Answer: \[ \boxed{\theta_2 = \frac{R_2}{R_1 + R_2} \theta_1} \]
In a steady-state heat transfer situation, the temperature at the interface is determined by the thermal resistances of the materials. The relation between the temperatures and resistances is: \[ \frac{\theta_2}{\theta_1} = \frac{R_2}{R_1 + R_2} \] Step 2: Conclusion.
Thus, the temperature \( \theta_2 \) at the boundary between the blocks is given by: \[ \theta_2 = \frac{R_2}{R_1 + R_2} \theta_1 \]
Final Answer: \[ \boxed{\theta_2 = \frac{R_2}{R_1 + R_2} \theta_1} \]
Was this answer helpful?
0
0
Top VITEEE Physics Questions
- A motor of power $P_0$ is used to deliver water at a certain rate through a given horizontal pipe. To increase the rate of flow of water through the same pipe $n$ times, the power of the motor is increased to $P_1$. The ratio of $P_1 $ to $P_0$ is
- A $30\,V-90\,W$ lamp is operated on a $120\,V$ DC line. A resistor is connected in series with the lamp in order to glow it properly. The value of resistance is
- The masses of three copper wires are in the ratio $2 : 3 : 5$ and their lengths are in the ratio $5 : 3 : 2$ .Then, the ratio of their electrical resistances is
- A soap bubble of radius $r$ is blown up to form a bubble of radius $2 r$ under isothermal conditions. If $T$ is the surface tension of soap solution, the energy spent in the blowing
- A large number of liquid drops each of radius r coalesce to from a single drop of radius R. The energy released in the process is converted into kinetic energy of the big drop so formed. The speed of the big drop is (given, surface tension of liquid T, density $\rho$)
View More Questions
Top VITEEE Thermodynamics Questions
- A Carnot engine operates between 400 K and 300 K. Its efficiency is:
- When a system is taken from state i to state f along the path iaf, it is found that \( Q = 50 \, \text{cal} \) and \( W = 20 \, \text{cal} \). Along the path ibf, \( Q = 36 \, \text{cal} \). W along the path ibf is:
- The temperature of equal masses of three different liquids A, B, and C are 12°C, 19°C, and 28°C respectively. The temperature when A and B are mixed is 16°C and when B and C are mixed is 23°C. The temperature when A and C are mixed is:
- The molar specific heats of an ideal gas at constant pressure and volume are denoted by \( C_p \) and \( C_v \), respectively. If \( \gamma = \dfrac{C_p}{C_v} \) and \( R \) is the universal gas constant, then \( C_v \) is equal to:
- A body cools from 50.0°C to 49.9°C in 5s. How long will it take to cool from 40.0°C to 39.9°C? Assume the temperature of surroundings to be 30.0°C and Newton’s law of cooling to be valid:
View More Questions
Top VITEEE Questions
- A motor of power $P_0$ is used to deliver water at a certain rate through a given horizontal pipe. To increase the rate of flow of water through the same pipe $n$ times, the power of the motor is increased to $P_1$. The ratio of $P_1 $ to $P_0$ is
- A $30\,V-90\,W$ lamp is operated on a $120\,V$ DC line. A resistor is connected in series with the lamp in order to glow it properly. The value of resistance is
- Which of the following is not a characteristic of transition elements ?
- Most crystals show good cleavage because their atoms, ions or molecules are
- Which of the following sets consists only of essential amino acids ?
View More Questions