Given below are two statements: one is labelled as Assertion $A$ and the other is labelled as Reason $R$
Assertion A: Steel is used in the construction of buildings and bridges.
Reason R: Steel is more elastic and its elastic limit is high.
In the light of above statements, choose the most appropriate answer from the options given below:
Assertion A: Steel is used in the construction of buildings and bridges.
Reason R: Steel is more elastic and its elastic limit is high.
In the light of above statements, choose the most appropriate answer from the options given below:
- Both A and R are correct but R is NOT the correct explanation of A
- Both A and R are correct and R is the correct explanation of A
- A is incorrect and R is correct
- A is correct but R is incorrect
The Correct Option is B
Solution and Explanation
Steel is widely used in the construction of buildings and bridges because:
- It has high elasticity (can return to its original shape after deformation).
- It has a high elastic limit (can withstand large stresses without permanent deformation).
Thus, both Assertion (A) and Reason (R) are correct, and R is the correct explanation of A.
Top Questions on mechanical properties of solids
- Two wires \(A\) and \(B\) made of different materials have lengths \(6.0\) cm and \(5.4\) cm, and areas of cross-sections \(3.0\times10^{-5}\,\text{m}^2\) and \(4.5\times10^{-5}\,\text{m}^2\), respectively. They are stretched by the same magnitude under the same load. If the ratio of Young’s modulus of \(A\) to that of \(B\) is \(x:3\), find the value of \(x\).
- JEE Main - 2026
- Physics
- mechanical properties of solids
A wire of uniform resistance \(\lambda\) \(\Omega\)/m is bent into a circle of radius r and another piece of wire with length 2r is connected between points A and B (ACB) as shown in figure. The equivalent resistance between points A and B is_______ \(\Omega\).
- JEE Main - 2026
- Physics
- mechanical properties of solids
- Two wires of cross sectional area \(1 \text{ cm}^2\) and \(2 \text{ cm}^2\) and lengths 20 cm and 30 cm are connected to the same load. If their extensions are same, find the ratio of their Young's modulus :
- JEE Main - 2026
- Physics
- mechanical properties of solids
The stress v/s strain graph of a material is as shown. Find the Young's modulus of the material.
- JEE Main - 2026
- Physics
- mechanical properties of solids
- Figure beside represents strain versus stress graph for four materials $A, B, C$ and $D$. Which material has maximum Young's modulus?
- JEE Main - 2026
- Physics
- mechanical properties of solids
Questions Asked in JEE Main exam
- For some \(\alpha, \beta \in R\), let \(A = \begin{pmatrix} \alpha & 2 \\1 & 2 \end{pmatrix}\) and \(B = \begin{pmatrix} 1 & 1 \\ \beta & 1 \end{pmatrix}\) be such that \(A^2-4A+2I-B^2-3B+I=O\). Then \((\det(\text{adj}(A^3-B^3)))^2\) is equal to:
- JEE Main - 2026
- Matrices and Determinants
MX is a sparingly soluble salt that follows the given solubility equilibrium at 298 K.
MX(s) $\rightleftharpoons M^{+(aq) }+ X^{-}(aq)$; $K_{sp} = 10^{-10}$
If the standard reduction potential for $M^{+}(aq) + e^{-} \rightarrow M(s)$ is $(E^{\circ}_{M^{+}/M}) = 0.79$ V, then the value of the standard reduction potential for the metal/metal insoluble salt electrode $E^{\circ}_{X^{-}/MX(s)/M}$ is ____________ mV. (nearest integer)
[Given : $\frac{2.303 RT}{F} = 0.059$ V]- JEE Main - 2026
- Electrochemistry
An infinitely long straight wire carrying current $I$ is bent in a planar shape as shown in the diagram. The radius of the circular part is $r$. The magnetic field at the centre $O$ of the circular loop is :
- JEE Main - 2026
- Current electricity
- For two identical cells each having emf \(E\) and internal resistance \(r\), the current through an external resistor of \(6\,\Omega\) is the same when the cells are connected in series as well as in parallel. The value of the internal resistance \(r\) is ________ \(\Omega\).
- JEE Main - 2026
- Current electricity
- The half-life of $^{65}$Zn is 245 days. After $x$ days, 75% of the original activity remained. The value of $x$ in days is __________ (Nearest integer).}
(Given: $\log 3 = 0.4771$ and $\log 2 = 0.3010$)- JEE Main - 2026
- Surface Chemistry
Concepts Used:
Mechanical Properties of Solids
Mechanical properties of solids intricate the characteristics such as the resistance to deformation and their strength. Strength is the ability of an object to resist the applied stress, to what extent can it bear the stress.
Therefore, some of the mechanical properties of solids involve:
- Elasticity: When an object is stretched, it changes its shape and when we leave, it retrieves its shape. Or we can say it is the property of retrieving the original shape once the external force is removed. For example Spring
- Plasticity: When an object changes its shape and never attains its original shape even when an external force is removed. It is the permanent deformation property. For example Plastic materials.
- Ductility: When an object is been pulled in thin sheets, wires or plates, it will be assumed that it has ductile properties. It is the property of drawing into thin wires/sheets/plates. For example Gold or Silver
- Strength: The ability to hold out applied stress without failure. Many types of objects have higher strength than others.