A zener diode has break down voltage of 5.0 V. The resistance required to allow a current of 100 mA through the zener in reverse bias when connected to a battery of emf 12 V is
- 50 $\Omega$
- 70 $\Omega$
- 100 $\Omega$
- 150 $\Omega$
The Correct Option is B
Solution and Explanation
$\left(12-5\right)V =7V =100 \times10^{-3}\times R$
$7=10^{-1}\times R$
$R=70\Omega$
Top Questions on applications of diode
- Which of the following statements is correct for an n-type semiconductor?
- KCET - 2025
- Physics
- applications of diode
- A pn junction diode without bias acts as:
- KEAM - 2025
- Physics
- applications of diode
- The electrostatic potential due to an electric dipole at a distance \( r \) varies as:
- JEE Main - 2024
- Physics
- applications of diode
- Find the current through Zener diode if its breakdown voltage is 5 V.
- JEE Main - 2024
- Physics
- applications of diode
- In the given circuit, the breakdown voltage of the Zener diode is 3.0 V. What is the value of Iz ?
- JEE Main - 2024
- Physics
- applications of diode
Questions Asked in WBJEE exam
What are the charges stored in the \( 1\,\mu\text{F} \) and \( 2\,\mu\text{F} \) capacitors in the circuit once current becomes steady?
- WBJEE - 2026
- Capacitors and Capacitance
Which one among the following compounds will most readily be dehydrated under acidic condition?
- WBJEE - 2026
- Organic Reactions
Manufacturers supply a zener diode with zener voltage \( V_z=5.6\,\text{V} \) and maximum power dissipation \( P_{\max}=\frac14\,\text{W} \). This zener diode is used in the circuit shown. Calculate the minimum value of the resistance \( R_s \) so that the zener diode will not burn when the input voltage is \( V_{in}=10\,\text{V} \).
- WBJEE - 2026
- Zener Diodes
Two charges \( +q \) and \( -q \) are placed at points \( A \) and \( B \) respectively which are at a distance \( 2L \) apart. \( C \) is the midpoint of \( AB \). The work done in moving a charge \( +Q \) along the semicircle CSD (\( W_1 \)) and along the line CBD (\( W_2 \)) are
- WBJEE - 2026
- electrostatic potential and capacitance
A piece of granite floats at the interface of mercury and water. If the densities of granite, water and mercury are \( \rho, \rho_1, \rho_2 \) respectively, the ratio of volume of granite in water to that in mercury is
- WBJEE - 2026
- Buoyancy and Floatation
Concepts Used:
Applications of diode
Diodes are used in many applications. By removing the signal component, several of them convert AC current to DC current also are known as rectifiers when used in this position. Diodes act as electric switches and can block voltage spikes, making them ideal for surgical protectors. They are hired to do digital logic. Some things are made from diodes such as power supply and voltage doubles. The sensors, as well as light on lighting devices and lasers, depend on LEDs. For electronic tuning, varactors are used, and for compressing transients in AC lines varistors are used. Zener diodes are used as voltage regulators where varactors are used for electronic tuning, and varistors are used for compressing transients in AC lines.
On the base of diodes, transistors and op-amps are built. The most common diode mode is the p-n junction. One (n) object with electrons as the charging conductor closes the second object (p) with holes (well-charged particles acted as depleted areas of electrons) as the charge carriers on this type of diode. Where they connect, the narrowing space forms, where electrons are dispersed to fill holes in the p-side. This effectively stops the flow of electrons. When a positive voltage is given to the p-side of this junction, electrons may easily move from it and the current flows into the diode to fill the holes. The shrinkage area expands as the negative bias interacts (i.e., negative voltage is given to the p-side), making the electrons harder to move across.