Question:
A vertical wellbore is drilled with a 12.25-inch drill bit. While drilling, the bit could drill a total rock volume of 385 ft\(^3\) in 6.5 hr. After drilling, the hole diameter throughout the depth is found to be 12.49 inch. The average rate of penetration is ____________ ft/hr (rounded off to two decimal places).
A vertical wellbore is drilled with a 12.25-inch drill bit. While drilling, the bit could drill a total rock volume of 385 ft\(^3\) in 6.5 hr. After drilling, the hole diameter throughout the depth is found to be 12.49 inch. The average rate of penetration is ____________ ft/hr (rounded off to two decimal places).
Show Hint
The average rate of penetration is directly proportional to the volume drilled and inversely proportional to the time taken.
Updated On: Dec 2, 2025
Show Solution
Verified By Collegedunia
Correct Answer: 68
Solution and Explanation
The average rate of penetration (ROP) is defined as the volume drilled per unit time. The formula to calculate the ROP is:
\[
\text{ROP} = \frac{\text{Volume drilled}}{\text{Time taken}}.
\]
Given:
- Total volume drilled = 385 ft\(^3\)
- Time taken = 6.5 hours
The average ROP is: \[ \text{ROP} = \frac{385}{6.5} = 59.23 \, \text{ft/hr}. \] Thus, the average rate of penetration is 59.23 ft/hr.
Final Answer: 59.23
- Total volume drilled = 385 ft\(^3\)
- Time taken = 6.5 hours
The average ROP is: \[ \text{ROP} = \frac{385}{6.5} = 59.23 \, \text{ft/hr}. \] Thus, the average rate of penetration is 59.23 ft/hr.
Final Answer: 59.23
Was this answer helpful?
0
0
Top GATE PE Oil and Gas Well Drilling Technology Questions
- Which ONE of the following options is CORRECT in relation to the standard drill pipe?
- Which of the following offshore drilling platform(s) has/have legs on the seabed?
- The hoisting system of a drilling rig contains seven ideal sheaves with hook load of \( 3.0 \times 10^5 \) kg. The static derrick load is .......... × \( 10^5 \) kg (rounded off to one decimal place).
- A drilling fluid with time-dependent rheology is used for the rotary drilling of a reservoir. The following equation describes the dependence of shear stress (\( \tau \)) on shear rate (\( \dot{\gamma} \)):
\[ \tau + \frac{\mu_0}{\alpha} \frac{d\tau}{dt} = \mu_0 \dot{\gamma} \] where \( \mu_0 \) and \( \alpha \) are constants.
If the rotation of the drill pipe is stopped at time \( t = 0 \), then the relaxation behavior of the fluid stress with time is: - The hydrostatic pressure gradient in a vertical well drilled in a relaxed depositional basin is 0.452 psi/ft. Assume that the gradient of effective horizontal stress with depth is constant in the drilling zone and has a value of 9.96 × 10⁻² psi/ft. The casing shoe is at 4000 ft depth.
While drilling the bore hole below the casing shoe with 10 ppg mud, the maximum allowed standpipe pressure is .......... psi (rounded off to one decimal place).
View More Questions
Top GATE PE Drilling Method and Machines Questions
- Which ONE of the following options is CORRECT in relation to the standard drill pipe?
- Which of the following offshore drilling platform(s) has/have legs on the seabed?
- The hoisting system of a drilling rig contains seven ideal sheaves with hook load of \( 3.0 \times 10^5 \) kg. The static derrick load is .......... × \( 10^5 \) kg (rounded off to one decimal place).
- A drilling fluid with time-dependent rheology is used for the rotary drilling of a reservoir. The following equation describes the dependence of shear stress (\( \tau \)) on shear rate (\( \dot{\gamma} \)):
\[ \tau + \frac{\mu_0}{\alpha} \frac{d\tau}{dt} = \mu_0 \dot{\gamma} \] where \( \mu_0 \) and \( \alpha \) are constants.
If the rotation of the drill pipe is stopped at time \( t = 0 \), then the relaxation behavior of the fluid stress with time is: - The hydrostatic pressure gradient in a vertical well drilled in a relaxed depositional basin is 0.452 psi/ft. Assume that the gradient of effective horizontal stress with depth is constant in the drilling zone and has a value of 9.96 × 10⁻² psi/ft. The casing shoe is at 4000 ft depth.
While drilling the bore hole below the casing shoe with 10 ppg mud, the maximum allowed standpipe pressure is .......... psi (rounded off to one decimal place).
View More Questions
Top GATE PE Questions
- Four fair coins are tossed simultaneously. The probability that at least one tail turns up is:
- Let \( \vec{A} = 2\ell - \mathbf{j} + \mathbf{k} \) and \( \vec{B} = \ell + \mathbf{f} \), where \( \ell, \mathbf{f}, \) and \( \mathbf{k} \) are unit vectors. The projection of \( \vec{B} \) on \( \vec{A} \) is:
- The value of \( \lim_{x \to \frac{\pi}{2}} \left( \frac{\cos x}{x - \frac{\pi}{2}} \right) \) is:
- Which ONE of the following CANNOT be obtained from pressure transient analysis in well testing?
- The primary objective of the electrostatic grid in electrostatic heater-treater used in crude oil processing is to
View More Questions